Voice Software Reference - Features Guide: Index

- A - | - B - | - C - | - D - | - E - | - F - | - G - | - H - | - I - | - L - | - M - | - N - | - O - | - P - | - R - | - S - | - T - | - V - | - X -

- A -

Adaptive Differential Pulse Code Modulation, G.726 1, 2
Address field, Generic Configuration File 1
address signals 1
adjusting speed and volume 1
ADPCM, G.726 1, 2
ADSI 1
Analog Display Services Interface (ADSI) 1, 2, 3
answering machine detection 1
Antares 1
ATDX_ANSRSIZ( ) 1, 2, 3, 4
ATDX_CONNTYPE( ) : cadence detection 1
ATDX_CONNTYPE( ) : Call Analysis results 1
ATDX_CONNTYPE( ) : connection types returned 1, 2, 3
ATDX_CONNTYPE( ) : Loop Current Detection 1
ATDX_CPERROR( ) 1
ATDX_CPTERM( ) 1, 2
ATDX_CRTNID( ) 1, 2
ATDX_DTNFAIL( ) 1, 2
ATDX_FRQDUR( ) 1, 2
ATDX_FRQDUR2( ) 1, 2
ATDX_FRQDUR3( ) 1, 2
ATDX_FRQHZ( ) 1, 2
ATDX_FRQHZ2( ) 1, 2
ATDX_FRQHZ3( ) 1, 2
ATDX_FRQOUT( ) 1, 2
ATDX_LONGLOW( ) 1
ATDX_SHORTLOW( ) 1, 2, 3, 4
ATDX_SIZEHI( ) 1, 2
ATDX_TERMMSK( ) 1
audio cadences 1

- B -

backward signals (CCITT signaling system tones) : definition 1
backward signals (CCITT signaling system tones) : Group A and B 1, 2, 3, 4
backward signals (CCITT signaling system tones) : overview 1
backward signals (CCITT Signaling System tones) : R2 MF tones 1
board : Name fields 1, 2
boards : emulated 1
boards : naming conventions 1
boards : virtual 1
buffer size adjustments for Internet telephony 1
Busy 1, 2

- C -

ca_ansrdgl 1, 2, 3
ca_cnosig 1
ca_dtn_deboff 1
ca_dtn_pres 1
ca_hedge 1, 2, 3
ca_higltch 1
ca_intflag 1
ca_intflg 1
ca_lcdly 1, 2
ca_lcdly1 1
ca_logltch 1
ca_lower2frq 1
ca_lower3frq 1
ca_lowerfrq 1, 2, 3
ca_maxansr 1, 2, 3
ca_mxtime3frq 1
ca_mxtimefrq 1, 2
ca_nbrdna 1
ca_noanswer 1
ca_nsbusy 1
CA_PAMD Speed Value 1
CA_PAMD_fail time 1
ca_pamd_failtime 1
CA_PAMD_minimum allowable ring 1
ca_pamd_minring 1
ca_pamd_qtemp 1
CA_PAMD_QUAL1TMP 1
ca_pamd_spdval 1
ca_stdely : Call Analysis cadence detection 1, 2
ca_stdely : Call Analysis positive voice detection 1
ca_stdely : Call Analysis SIT tone detection 1
ca_stdely : definition 1
ca_stdely : settings 1, 2
ca_time2frq 1
ca_time3frq 1
ca_timefrq 1, 2, 3
ca_upper2frq 1
ca_upper3frq 1
ca_upperfrq 1, 2, 3, 4
cadence 1, 2
cadence detection : ATDX_ANSRSIZ( ) 1
cadence detection : ATDX_CONNTYPE( ) 1
cadence detection : ATDX_LONGLOW( ) 1, 2
cadence detection : ATDX_SHORTLOW( ) 1, 2
cadence detection : ATDX_SIZEHI( ) 1, 2
cadence detection : Busy 1
cadence detection : ca_ansrdgl 1
cadence detection : ca_cnosig 1
cadence detection : ca_cnosil 1
cadence detection : ca_higltch 1
cadence detection : ca_logltch 1
cadence detection : ca_maxansr 1
cadence detection : ca_nbrdna 1
cadence detection : ca_nsbusy 1
cadence detection : ca_stdely 1
cadence detection : Call Analysis 1, 2, 3, 4
Cadence Detection : Call Analysis 1
cadence detection : Connect 1
cadence detection : DX_CAP parameters 1, 2, 3
cadence detection : Extended Attributes 1
cadence detection : high glitch 1
cadence detection : low glitch 1
cadence detection : No Answer 1
cadence detection : No Ringback 1
cadence detection : nonsilence 1
cadence detection : outcomes 1
cadence detection : parameters 1, 2, 3
cadence detection : parameters affecting Busy 1
cadence detection : parameters affecting Connect 1
cadence detection : parameters affecting No Answer 1
cadence detection : parameters affecting No Ringback 1, 2
cadence detection : salutation processing 1
cadence detection : start delay 1
cadence patterns : double ring (figure) 1
cadence patterns : standard busy signal 1
cadence patterns : standard single ring 1
cadence patterns : typical 1
Call Analysis 1
Call Analysis : ATDX_CPERROR( ) 1
Call Analysis : ATDX_CPTERM( ) 1, 2
Call Analysis : Basic 1
Call Analysis : call outcomes 1, 2
Call Analysis : call outcomes (busy, connect, no answer, no ringback, operator intercept 1
Call Analysis : components 1
Call Analysis : description 1, 2
Call Analysis : dial tone 1
Call Analysis : DX_CAP 1, 2
Call Analysis : dx_dial( ) 1, 2
Call Analysis : Enhanced (PerfectCall) 1, 2
Call Analysis : errors 1
Call Analysis : Extended Attribute functions 1
Call Analysis : frequency detection 1
Call Analysis : Frequency detection 1
Call Analysis : frequency detection : DX_CAP parameters 1, 2
Call Analysis : frequency detection : errors 1
Call Analysis : frequency detection : range 1
Call Analysis : frequency detection : SIT tones 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14
Call Analysis : how to use 1
Call Analysis : initiating 1
Call Analysis : introduction 1
Call Analysis : Loop Current Detection 1, 2
Call Analysis : obtaining additional information 1
Call Analysis : parameter structure 1
Call Analysis : PerfectCall (Enhanced) 1, 2, 3
Call Analysis : positive voice detection 1, 2, 3
Call Analysis : results : answer duration 1
Call Analysis : results : connection type 1
Call Analysis : results : conntype 1
Call Analysis : results : dial tone failure 1
Call Analysis : results : error 1
Call Analysis : results : first frequency duration 1
Call Analysis : results : frequency detection 1
Call Analysis : results : frequency out of bounds 1
Call Analysis : results : last termination 1
Call Analysis : results : non-silence 1
Call Analysis : results : second frequency duration 1
Call Analysis : results : shorter silence 1
Call Analysis : results : third frequency duration 1
Call Analysis : results : tone identifier 1, 2
Call Analysis : results : tone_id 1
Call Analysis : SIT tone detection, DX_CAP parameters 1, 2
Call Analysis : termination results 1
call outcome, determining 1
Call Progress Characterization Utility 1
Caller ID : accessing information 1
Caller ID : enabling 1
Caller ID : error handling 1
Caller ID : introduction 1
Caller ID : overview 1
Caller ID : related references 1
Caller ID : supported formats 1
CCITT Signaling System R2 MF tones 1, 2
channel names 1
Channel Parameter Block, ca_dtn_pres 1
check_term( ) 1
CLASS 1, 2
compelled signaling 1
CON_CAD 1
CON_PAMD 1
connect 1
Continuous No Signal 1
controlling speed and volume 1
Convenience Functions : dx_wtcallid( ) 1
Convenience Functions : Speed and Volume 1
CPC Utility 1
CR_BUSY 1
CR_CEPT 1
CR_CNCT 1
CR_ERROR 1
CR_FAXTONE 1
CR_LGTUERR 1
CR_MEMERR 1
CR_MXFRQERR 1
CR_NOANS 1
CR_NODIALTONE 1
CR_NORB 1
CR_OVRLPERR 1
CR_STOPD 1
CR_TMOUTOFF 1
CR_TMOUTON 1
CR_UNEXPTN 1
CR_UPFRQERR 1
Custom Local Area Signaling Services 1, 2
custserv 1

- D -

D/2x, naming 1, 2
D/4x, naming 1, 2
D/8x, naming 1, 2
d40demo : global variables 1
d40demo : included with the voice software for Linux 1
d40demo : initialization 1
d40demo : menu system routine 1
d40demo : menu system routine : check_term( ) 1
d40demo : menu system routine : DL_DATA 1
d40demo : menu system routine : DL_MENU 1
d40demo : menu system routine : DL_MENUPTS 1
d40demo : menu system routine : gt_data( ) 1
d40demo : menu system routine : implementation 1
d40demo : menu system routine : menu_engine( ) 1
d40demo : menu system routine : model 1
d40demo : messaging system routine 1
d40demo : outline 1
d40demo : program overview 1, 2, 3, 4
DDI (Direct Dialing-In) service 1
demo programs 1, 2
demo programs : asynchronous callback answer 1
demo programs : asynchronous polled mode answer 1
demo programs : caveats 1
demo programs : cbansr 1
demo programs : custserv 1, 2
demo programs : d40demo 1, 2
demo programs : directory structure 1
demo programs : Global DPD 1
demo programs : horoscope 1
demo programs : pansr 1
demo programs : physical connection 1
demo programs : running 1, 2, 3
demo programs : synchronous 1, 2
detection : answering machine 1
Detection : dial tone 1
Detection : Fax machine or modem 1
device names 1
device names : board 1
device names : channel 1
device names : D/2x 1
device names : D/41ESC 1
device names : D/4x 1
device names : DIALOG/HD 1
Dial Pulse Detection 1
Dial tone : detection 1
Dial tone : international 1
Dial tone : local 1
Dial tone : special 1
Dial Tone Debounce 1
Dial Tone Not Present 1
Dial Tone Present 1
Dialed Number Identification Service 1
DIALOG/HD boards 1, 2, 3
digits for adjusting play 1
Direct Dialing-In (DDI) service 1
Disconnect Supervision 1
DL_DATA 1
DL_MENU 1
DL_MNUOPTS 1
DNIS (Dialed Number Identification Service) 1
DTMF detection 1
dtnfail 1
dx_addspddig( ) 1
dx_addtone( ) 1, 2, 3
dx_addvoldig( ) 1
dx_adjsv( ) 1, 2
dx_blddt( ) 1, 2
dx_blddtcad( ) 1
dx_bldst( ) 1, 2
dx_bldstcad( ) 1, 2
dx_bldtngen( ) 1
DX_CAP 1
DX_CAP : ca_cnosig 1
DX_CAP : ca_dtn_deboff 1
DX_CAP : ca_dtn_npres 1
DX_CAP : ca_maxintering 1
DX_CAP : ca_pamd_failtime 1
DX_CAP : ca_pamd_minring 1
DX_CAP : ca_pamd_qtemp 1
DX_CAP : ca_pamd_spdval 1
DX_CAP : ca_stdely 1
DX_CAP : Continuous No Signal 1
DX_CAP : Dial Tone Debounce 1
DX_CAP : Dial Tone Not Present 1
DX_CAP : Dial Tone Present 1
DX_CAP : Maximum Inter-ring 1
DX_CAP : No Answer 1
DX_CAP : PAMD fail time 1
DX_CAP : PAMD minimum allowable ring 1
DX_CAP : PAMD Qualification Template 1
DX_CAP : PAMD Speed Value 1
DX_CAP : parameters used by Call Analysis 1
DX_CAP : Start Delay 1
dx_chgdur( ) 1
dx_chgfreq( ) 1
dx_chgrepcnt( ) 1
dx_clrcap( ) 1
dx_deltones( ) 1, 2, 3
dx_dial( ) 1, 2, 3
dx_distone( ) 1
dx_enbtone( ) 1
dx_getdig( ) 1, 2
dx_getdigEx( ) 1
dx_getsvmt( ) 1
dx_getxmitslot( ) 1
dx_getxmitslotecr( ) 1
dx_gtextcallid( ) 1
dx_initcallp( ) 1
dx_listen( ) 1
DX_OPTDIS 1
DX_OPTEN 1
DX_OPTNOCON 1
DX_PAMDENABLE 1, 2
DX_PAMDOPTEN 1, 2
dx_playiottdata( ) 1
dx_playtone( ) 1
DX_PVDENABLE 1
DX_PVDOPTEN 1
DX_PVDOPTNOCON 1
dx_rec( ) 1
dx_reciottdata( ) 1
dx_recm( ) 1
dx_recmf( ) 1
dx_setevtmsk( ) 1
dx_setgtdamp( ) 1, 2
dx_setparm( ) for enabling Caller ID 1
dx_setsvcond( ) 1, 2
dx_setsvmt( ) 1, 2, 3, 4
DX_SVCB 1
DX_SVMT 1, 2
dx_unlistenecr( ) 1
dx_wtcallid( ) 1
DX_XPB 1

- E -

Echo Cancellation Resource (ECR) : bridge 1
Echo Cancellation Resource (ECR) : buffer size adjustments for Internet telephony 1
Echo Cancellation Resource (ECR) : echo component 1
Echo Cancellation Resource (ECR) : echo reference signal 1
Echo Cancellation Resource (ECR) : echo-carrying signal 1
Echo Cancellation Resource (ECR) : introduction 1
Echo Cancellation Resource (ECR) : mode 1
Echo Cancellation Resource (ECR) : overview 1, 2
Echo canceller 1
Echo component 1
Echo reference signal 1
Echo-carrying signal 1
ECR 1
ECR bridge 1
enabling Caller ID 1
encoding algorithm, G.726 1
encoding algorithms, support in SCR 1
error handling in Caller ID 1

- F -

Fax machine detection 1
forward signals (CCITT signaling system tones) 1, 2, 3, 4, 5
forward signals (CCITT signaling system tones) 1
frequency detection using Call Analysis 1, 2, 3
frequency, lower 1
frequency, minimum time 1
frequency, upper 1

- G -

G.726 1, 2, 3, 4
GDPD 1
Generic Configuration File : Address field 1
Generic Configuration File : file format 1
Generic Configuration File : Ioport field 1, 2
Generic Configuration File : Name field 1, 2
Generic Configuration File : Nchn field 1
Global Dial Pulse Detection (Global DPD) : API 1
Global Dial Pulse Detection (Global DPD) : demonstration 1
Global Dial Pulse Detection (Global DPD) : features 1
Global Dial Pulse Detection (Global DPD) : improving detection 1
Global Dial Pulse Detection (Global DPD) : overview 1, 2
Global Dial Pulse Detection (Global DPD) : parameters 1
Global Dial Pulse Detection (Global DPD) : programming 1
Global Dial Pulse Detection (Global DPD) : supported applications 1
Global DPD 1
Global Tone Detection : applications 1
Global Tone Detection : building tone templates 1
Global Tone Detection : Call Analysis memory usage 1
Global Tone Detection : define dual frequency cadence tone 1
Global Tone Detection : define dual frequency tone 1
Global Tone Detection : define single frequency cadence tone 1
Global Tone Detection : define single frequency tone 1
Global Tone Detection : defining tones 1
Global Tone Detection : definition 1
Global Tone Detection : disconnect supervision 1
Global Tone Detection : functions with which GTD cannot work 1
Global Tone Detection : introduction 1
Global Tone Detection : leading edge detection 1
Global Tone Detection : maximum number of tones 1
Global Tone Detection : overview 1
Global Tone Detection : R2 MF 1
Global Tone Detection : retrieving tone events 1
Global Tone Detection : set amplitude 1
Global Tone Detection : use with Global DPD 1
Global Tone Detection : using with PBX 1
Global Tone Detection : with Caller ID 1
Global Tone Generation : data structures 1
Global Tone Generation : definition 1
Global Tone Generation : introduction 1
Global Tone Generation : overview 1
Global Tone Generation : R2 MF 1
Global Tone Generation : template 1
Global Tone Generation : TN_GEN 1
Global Tone Generation : with Caller ID 1
Group A and B signals 1, 2, 3, 4
Group I and II signals 1, 2, 3, 4
gt_data( ) 1
GTD tones, defining 1

- H -

High Density boards, terminology 1
horoscope 1

- I -

incoming register 1
Incoming Register 1
incoming signals, indicating 1
Internet telephony, buffer size adjustments 1
interregister signals 1
Ioport field, Generic Configuration File 1, 2

- L -

leading edge detection using debounce time 1
line signals 1
Loop Current Detection 1
Loop Current Detection : ca_lcdly 1
Loop Current Detection : ca_lcdly1 1
Loop Current Detection : parameters affecting a connect 1
Loop Current Detection : parameters ignored 1
Loop Current Detection : use in Call Analysis 1
Loop Current Detection : use in PerfectCall Call Analysis 1, 2

- M -

Maximum Inter-ring 1
maxintering 1
memory requirements, R2 MF 1
menu_engine( ) 1
mode parameter 1
Modem detection 1

- N -

Name field in configuration files 1, 2, 3
Nchn field, in Generic Configuration File 1
No Answer 1, 2
No Ringback 1
nonsilence 1

- O -

operator intercept SIT tones 1, 2, 3, 4, 5, 6, 7, 8, 9
outgoing register 1

- P -

PAMD 1
PAMD fail time 1
PAMD minimum allowable ring 1
PAMD Qualification Template 1
PAMD_FULL 1
PAMD_QUICK 1
parameter files, voice.prm 1
PerfectCall Call Analysis : activating 1
PerfectCall Call Analysis : ATDX_CONNTYPE 1
PerfectCall Call Analysis : Busy 1
PerfectCall Call Analysis : ca_dtn_npres, ca_dtn_npres 1
PerfectCall Call Analysis : components 1
PerfectCall Call Analysis : dial tone detection 1
PerfectCall Call Analysis : disabling 1
PerfectCall Call Analysis : fax machine detection 1
PerfectCall Call Analysis : modem detection 1
PerfectCall Call Analysis : outcomes 1
PerfectCall Call Analysis : overview 1
PerfectCall Call Analysis : Positive Answering Machine Detection 1
PerfectCall Call Analysis : ringback 1
PerfectCall Call Analysis : tone definitions 1
PerfectCall Call Analysis : tone detection 1
PerfectCall Call Analysis : tone types 1
play, specifying mode 1
PM_ADSI 1, 2
Positive Answering Machine Detection 1, 2
positive voice detection using Call Analysis 1, 2
Positive Voice Detection using Call Analysis 1, 2
protocol, VPIM 1, 2

- R -

R2 MF signaling : address signals 1
R2 MF signaling : and Global Tone Detection/Generation 1
R2 MF signaling : backward signals (CCITT signaling system tones) 1, 2, 3, 4, 5, 6
R2 MF signaling : compelled signaling 1
R2 MF signaling : definition 1
R2 MF signaling : Dialed Number Identification Service 1
R2 MF signaling : Dialogic support 1
R2 MF signaling : direct dialing-in service 1
R2 MF signaling : forward signals (CCITT signaling system tones) 1, 2, 3, 4, 5, 6, 7
R2 MF signaling : Group A and B signals 1, 2
R2 MF signaling : Group I and II signals 1, 2, 3, 4
R2 MF signaling : incoming register 1
R2 MF signaling : interregister signals 1
R2 MF signaling : line signals 1
R2 MF signaling : maximum number of tones 1
R2 MF signaling : multifrequency combinations 1
R2 MF signaling : outgoing register 1
R2 MF signaling : outgoing signals 1
R2 MF signaling : overview 1
R2 MF signaling : related publications 1
R2 MF signaling : signal meanings 1
R2 MF signaling : Signal Meanings 1
R2 MF signaling : Voice board support 1
r2_creatfsig( ) 1
r2_playbsig( ) 1
recording with silence compression 1, 2
related publications 1
Ringback detection 1

- S -

SCR 1, 2
silence compressed record 1, 2
SIT tones 1, 2, 3, 4, 5, 6, 7, 8, 9
SIT tones : detection : affect on GTD tones 1
SIT tones : detection : lower frequency (tone 1) 1, 2, 3
SIT tones : detection : lower frequency (tone 2) 1
SIT tones : detection : lower frequency (tone 3) 1
SIT tones : detection : memory usage 1
SIT tones : detection : start delay 1, 2
SIT tones : detection : time (tone 1) 1
SIT tones : detection : time of frequency (tone 1) 1, 2
SIT tones : detection : time of frequency (tone 2) 1, 2
SIT tones : detection : time of frequency (tone 3) 1, 2
SIT tones : detection : upper frequency (tone 1) 1, 2, 3
SIT tones : detection : upper frequency (tone 2) 1
SIT tones : detection : upper frequency (tone 3) 1
SIT tones : detection : using Call Analysis 1, 2, 3, 4, 5, 6, 7, 8
SIT tones : detection : using Extended Attribute functions 1
SIT tones : frequency information 1
Special Information Tones 1
speed 1
speed and volume control : adjustment digits 1
speed and volume control : adjustment functions 1
speed and volume control : Convenience functions 1
speed and volume control : explicitly adjusting 1
speed and volume control : introduction 1
speed and volume control : modification tables 1, 2
speed and volume control : overview 1
speed and volume control : setting adjustment conditions 1
standard voice processing (SVP) mode 1
Standard Voice Processing (SVP) mode 1
Start Delay 1
synchronous demo program 1, 2

- T -

talk-off rejection 1
TID_BUSY1 1, 2
TID_BUSY2 1, 2
TID_DIAL_INTL 1
TID_DIAL_LCL 1
TID_DIAL_XTRA 1
TID_FAX1 1
TID_FAX2 1
TID_RNGBK1 1
TN_GEN 1
Tone definitions 1
Tone events, retrieving 1
Tone Templates 1, 2
Tones : maximum number for Global Detection 1
Tones : maximum number for R2 MF 1
Transaction Record 1, 2

- V -

virtual boards 1
voice board, R2 MF 1
voice coder, G.726 1, 2
Voice Profile for Internet Messaging (VPIM) 1, 2
voice.prm 1
volume 1
VPIM 1, 2

- X -

xx_listen( ) 1, 2

- A - | - B - | - C - | - D - | - E - | - F - | - G - | - H - | - I - | - L - | - M - | - N - | - O - | - P - | - R - | - S - | - T - | - V - | - X -