Call Waiting x100P and Cisco IP Phone
- From: "kevin ling" <kevin.ling (at) amphenol.com.tw>
- Date: Fri, 3 Feb 2006 10:28:57 +0800
Hi,
In AAH, you can setup the "Incoming Calls" to ring your extension. Or to
ring extensions in a ring group.
-----Original Message-----
From: asterisk-users-bounces (at) lists.digium.com
[mailto:asterisk-users-bounces (at) lists.digium.com] On Behalf Of Chuck Smith
Sent: Friday, February 03, 2006 6:53 AM
To: 'Asterisk Users Mailing List - Non-Commercial Discussion'
Subject: [Asterisk-Users] Call Waiting x100P and Cisco IP Phone
OK I have looked everywhere and I can't get a clear understanding on how to
do this. If I have an x100P card connected to my home phone line and I am
receiving calls on my Cisco 7940 IP phone with a SIP firmware loaded on it.
How can I send the hook flash to the x100P card to switch to the call coming
in from the PSTN? I am using Asterisk (at) Home 2.4. I can hear the call waiting
tone coming over the line but the phone doesn't recognize it.
Thanks
_______________________________________________
--Bandwidth and Colocation provided by Easynews.com --
Asterisk-Users mailing list
To UNSUBSCRIBE or update options visit:
http://lists.digium.com/mailman/listinfo/asterisk-users
_______________________________________________
--Bandwidth and Colocation provided by Easynews.com --
Asterisk-Users mailing list
To UNSUBSCRIBE or update options visit:
http://lists.digium.com/mailman/listinfo/asterisk-users