RES: pap2 Dial plan

You’re almost right.

The PAP2 has some features that are factory default. I don’t remember the section in the web interface, but here’s what you going to do:

Find the section that contains a lot of features name with values like this *56 or *78.

Erase all of them. Letting’ this filled you’ll not be able to implement your asterisk features, cause’ they are conflicting with the (factory defaults) PAP2 commands.

About the long time waiting for start to call, the problem is that the PAP2 waits 10 or 15 (I don’t remember de default) seconds after a digit is pressed to start the “send” procedure.

To change these settings, go to Regional/Control Timer Values/ Interdigit Long Times and change the value to any other (this is expressed in seconds).

Hope it helps.

Regards,

----

Filipe Mordhorst

Brazil-SC

De: asterisk-users-bounces (at) lists.digium.com [mailto:asterisk-users-bounces (at) lists.digium.com] Em nome de Giridhar Bandi
Enviada em: terça-feira, 7 de março de 2006 14:47
Para: asterisk-users (at) lists.digium.com
Assunto: [Asterisk-Users] pap2 Dial plan

Hi

i am using pap2 phone adaptors as clients to connect to asterisk server
i am able to make calls but i cannot access voice mail using phone
or start recording while call is in progress

and when i place a call to local sip extension there is a long pause ( 15 sec )
before the call gets dialled

i assume that the problem would be due to the dial plan in PAP2

if so please help me changing it

thanks
Giridhar Bandi

By Date:	<-- -->
By Thread:	<-- -->