PAP2 won't make two g729 calls at the same time

["Tom Vile" <tvile (at) baldwintechsolutions.com>]

Actually its hardware related.

On 3/8/06, Nick Hoffman <nick.hoffman (at) altcall.com> wrote:
> On Thu March 9 2006 03:43, Warren Burstein <warren (at) softov.co.il> wrote:
> > I have a Linksys PAP2.  Identical setups for the two channels in both
> > the unit and in Asterisk.  In particular, both channels enable g729 and
> > set it as the preferred codec, and have disallow=all and allow=g729 in
> > sip.conf.
> >
> > If we make a call on one channel, it works (and uses g729), but if we
> > make a call on the other channel when the first one is still connected,
> > it fails.  We have three g729 licenses, and no others were in use at the
> > times this happened, but even if we didn't have enough, how would the
> > PAP2 know that?
>
>
> Hi Warren. On the PAP2, if you can make 2 simultaneous calls but only 1 can
> use G.729, I would hazard a guess that the PAP2 only has 1 G.729 license
> installed on it. I doubt that can be increased.
>
> Hope that helps.
> -- Nick
> e: nick.hoffman (at) altcall.com
> p: +61 7 5591 3588
> f: +61 7 5591 6588
>
> If you receive this email by mistake, please notify us and do not make any
> use of the email.  We do not waive any privilege, confidentiality or
> copyright associated with it.
> _______________________________________________
> --Bandwidth and Colocation provided by Easynews.com --
>
> Asterisk-Users mailing list
> To UNSUBSCRIBE or update options visit:
>    http://lists.digium.com/mailman/listinfo/asterisk-users
>


--
Tom Vile
Baldwin Technology Solutions, Inc
Consulting - Web Design - VoIP Telephony
www.baldwintechsolutions.com
Phone: 518-631-2855 x205
Fax:     518-631-2856
_______________________________________________
--Bandwidth and Colocation provided by Easynews.com --

Asterisk-Users mailing list
To UNSUBSCRIBE or update options visit:
   http://lists.digium.com/mailman/listinfo/asterisk-users