Asterisk Realtime and SIP Registration

["Douglas Garstang" <dgarstang (at) oneeighty.com>]

Kevin Fleming has said on numerous ocassions that this is known not to work, and is not supported.

-----Original Message-----
From: Benjamin Stocker [mailto:bstocker (at) gmail.com]
Sent: Tuesday, June 06, 2006 4:31 AM
To: asterisk-users (at) lists.digium.com
Subject: [Asterisk-Users] Asterisk Realtime and SIP Registration

Hi!

I use the following configuration to register my asterisk server to my SIP provider:

register => 12345:passwd (at) sip.provider.com/12345

sip.conf :
[sipout-test]
type=peer
username=12345
fromuser=12345
fromdomain=provider.com
secret=passwd
insecure=very
host=sip.provider.com
qualify=yes
context=test-incoming

extensions.conf:
exten => 12345,1,Dial(SIP/10)
exten => _0NXZXXXXXX,1,Dial(SIP/${EXTEN} (at) sipout-test)

This works fine when I put it into the config files. I can dial other numbers via my provider and receive calls. Wenn  I put everything into Realtime tables (except the register command), incoming calls work only after

  * I make at least one outgoing call
  - or -
  * Somebody calls me twice

On incoming calls, the caller first gets a 'user unavailale' from my SIP provider. When hanging up and calling again, the connection establishes successfully and I see this when entering 'sip show peers':

sipout-test/12345  IP.AD.DR.ESS                 5060     UNKNOWN

This line does not show up when I registering my phone to my asterisk server. But it shows up immediately after registerung the phone when I  use config files instead of RTA.

I don't know wheter this is RTA-  or a config-problem.

_______________________________________________
--Bandwidth and Colocation provided by Easynews.com --

Asterisk-Users mailing list
To UNSUBSCRIBE or update options visit:
   http://lists.digium.com/mailman/listinfo/asterisk-users