From: "Brian McCarey" <brian_mccarey (at) hotmail.com>
To: "'Asterisk Users Mailing List - Non-Commercial Discussion'"
<asterisk-users (at) lists.digium.com>
Date: Thu, 22 Jun 2006 18:40:25 +0100
Subject: [Asterisk-Users] Passing DID to external number?
Hi,
We run a small switchboard using Asterisk and Free PBX.
We have two main extensions and two ring groups. The first ring group rings the two internal extensions. If the internal extensions do not pick up the call after 15 seconds then
the second ring group kicks in which should ring the two internal extensions plus two external numbers.
Firstly, how do I pass the DID number of an incoming call to the external number so that the external number sees the incoming number and not the voip dial out number?
Secondly, when the second ring group kicks in only one of the external numbers dials when both internal extensions and both external numbers should ring according to the ring group setting. Any ideals what's going wrong?
Kind regards
Brian. UK