DMV 600 Congestion in Release 5.1.1
- From: "General Listmanager" <General.listmanager (at) pysdiscussext.py.intel.com>
- Date: Wed, 5 Oct 2005 13:25:43 GMT
From: james taylor
-Hi all,
I'm using System Release 5.1.1 with feature pack.
The board DMV 600 4 E1 gets synced with our E1 line but when i used to make a call the result is Congestion.
The below is my config file ml1_4x2_net5.config
[encoder]
SetParm=0x401,0x006b39 ! PrmAGCk
SetParm=0x403,0x028f5c ! PrmAGCMEM_sil_reset
SetParm=0x404,0x006d3a ! PrmAGCMEM_max_size
SetParm=0x405,0x0147ae ! PrmAGClow_threshold
SetParm=0x408,0x0f3523 ! PrmAGCmax_gain
SetParm=0x40b,0x7eb851 ! PrmAGCnf_attfast
SetParm=0x40c,0x0147ae ! PrmAGCgain_inc_speech
!SetParm=0x404,4194 ! AGC Noise Floor Decay
!SetParm=0x405,7040 ! AGC Lower Threshold
!SetParm=0x406,0x1f4 ! AGC Hangover Time
!SetParm=0x407,8388524 ! AGC Very Slow Decay
!SetParm=0x408,838860 ! AGC Gain Inc. speed
!SetParm=0x409,1 ! AGC Spike detection on=1(default)
!SetParm=0x40a,419430 ! AGC sp delta
!SetParm=0x40b,8304721 ! AGC sp vsr decay
!SetParm=0x40c,0xa3d7 ! AGC sp InvSpLen Min
!SetParm=0x40d,239674 ! AGC sp inv_tone_len
!SetParm=0x40e,2768240 ! AGC sp avgoff
!SetParm=0x40f,4194304 ! AGC sp vsr init
!SetParm=0x410,99405 ! AGC Upper Threshold
!SetParm=0x411,1768318 ! AGC K Constant
[recorder]
SetParm=0x203,0x21 ! BEEP_DGSD, Digital Sound Beep
!
!Luke - Have to enable EC on channels 1-60 and disable EC on 61-120
!
[sigDet.61]
SetParm=1795,0 ! Enable Echo Cancellation (0=Disable,1=Enable)
[sigDet.62]
SetParm=1795,0 ! Enable Echo Cancellation (0=Disable,1=Enable)
[sigDet.63]
SetParm=1795,0 ! Enable Echo Cancellation (0=Disable,1=Enable)
[sigDet.64]
SetParm=1795,0 ! Enable Echo Cancellation (0=Disable,1=Enable)
[sigDet.65]
SetParm=1795,0 ! Enable Echo Cancellation (0=Disable,1=Enable)
[sigDet.66]
SetParm=1795,0 ! Enable Echo Cancellation (0=Disable,1=Enable)
[sigDet.67]
SetParm=1795,0 ! Enable Echo Cancellation (0=Disable,1=Enable)
[sigDet.68]
SetParm=1795,0 ! Enable Echo Cancellation (0=Disable,1=Enable)
[sigDet.69]
SetParm=1795,0 ! Enable Echo Cancellation (0=Disable,1=Enable)
[sigDet.70]
SetParm=1795,0 ! Enable Echo Cancellation (0=Disable,1=Enable)
[sigDet.71]
SetParm=1795,0 ! Enable Echo Cancellation (0=Disable,1=Enable)
[sigDet.72]
SetParm=1795,0 ! Enable Echo Cancellation (0=Disable,1=Enable)
[sigDet.73]
SetParm=1795,0 ! Enable Echo Cancellation (0=Disable,1=Enable)
[sigDet.74]
SetParm=1795,0 ! Enable Echo Cancellation (0=Disable,1=Enable)
[sigDet.75]
SetParm=1795,0 ! Enable Echo Cancellation (0=Disable,1=Enable)
[sigDet.76]
SetParm=1795,0 ! Enable Echo Cancellation (0=Disable,1=Enable)
[sigDet.77]
SetParm=1795,0 ! Enable Echo Cancellation (0=Disable,1=Enable)
[sigDet.78]
SetParm=1795,0 ! Enable Echo Cancellation (0=Disable,1=Enable)
[sigDet.79]
SetParm=1795,0 ! Enable Echo Cancellation (0=Disable,1=Enable)
[sigDet.80]
SetParm=1795,0 ! Enable Echo Cancellation (0=Disable,1=Enable)
[sigDet.81]
SetParm=1795,0 ! Enable Echo Cancellation (0=Disable,1=Enable)
[sigDet.82]
SetParm=1795,0 ! Enable Echo Cancellation (0=Disable,1=Enable)
[sigDet.83]
SetParm=1795,0 ! Enable Echo Cancellation (0=Disable,1=Enable)
[sigDet.84]
SetParm=1795,0 ! Enable Echo Cancellation (0=Disable,1=Enable)
[sigDet.85]
SetParm=1795,0 ! Enable Echo Cancellation (0=Disable,1=Enable)
[sigDet.86]
SetParm=1795,0 ! Enable Echo Cancellation (0=Disable,1=Enable)
[sigDet.87]
SetParm=1795,0 ! Enable Echo Cancellation (0=Disable,1=Enable)
[sigDet.88]
SetParm=1795,0 ! Enable Echo Cancellation (0=Disable,1=Enable)
[sigDet.89]
SetParm=1795,0 ! Enable Echo Cancellation (0=Disable,1=Enable)
[sigDet.90]
SetParm=1795,0 ! Enable Echo Cancellation (0=Disable,1=Enable)
[sigDet.91]
SetParm=1795,0 ! Enable Echo Cancellation (0=Disable,1=Enable)
[sigDet.92]
SetParm=1795,0 ! Enable Echo Cancellation (0=Disable,1=Enable)
[sigDet.93]
SetParm=1795,0 ! Enable Echo Cancellation (0=Disable,1=Enable)
[sigDet.94]
SetParm=1795,0 ! Enable Echo Cancellation (0=Disable,1=Enable)
[sigDet.95]
SetParm=1795,0 ! Enable Echo Cancellation (0=Disable,1=Enable)
[sigDet.96]
SetParm=1795,0 ! Enable Echo Cancellation (0=Disable,1=Enable)
[sigDet.97]
SetParm=1795,0 ! Enable Echo Cancellation (0=Disable,1=Enable)
[sigDet.98]
SetParm=1795,0 ! Enable Echo Cancellation (0=Disable,1=Enable)
[sigDet.99]
SetParm=1795,0 ! Enable Echo Cancellation (0=Disable,1=Enable)
[sigDet.100]
SetParm=1795,0 ! Enable Echo Cancellation (0=Disable,1=Enable)
[sigDet.101]
SetParm=1795,0 ! Enable Echo Cancellation (0=Disable,1=Enable)
[sigDet.102]
SetParm=1795,0 ! Enable Echo Cancellation (0=Disable,1=Enable)
[sigDet.103]
SetParm=1795,0 ! Enable Echo Cancellation (0=Disable,1=Enable)
[sigDet.104]
SetParm=1795,0 ! Enable Echo Cancellation (0=Disable,1=Enable)
[sigDet.105]
SetParm=1795,0 ! Enable Echo Cancellation (0=Disable,1=Enable)
[sigDet.106]
SetParm=1795,0 ! Enable Echo Cancellation (0=Disable,1=Enable)
[sigDet.107]
SetParm=1795,0 ! Enable Echo Cancellation (0=Disable,1=Enable)
[sigDet.108]
SetParm=1795,0 ! Enable Echo Cancellation (0=Disable,1=Enable)
[sigDet.109]
SetParm=1795,0 ! Enable Echo Cancellation (0=Disable,1=Enable)
[sigDet.110]
SetParm=1795,0 ! Enable Echo Cancellation (0=Disable,1=Enable)
[sigDet.111]
SetParm=1795,0 ! Enable Echo Cancellation (0=Disable,1=Enable)
[sigDet.112]
SetParm=1795,0 ! Enable Echo Cancellation (0=Disable,1=Enable)
[sigDet.113]
SetParm=1795,0 ! Enable Echo Cancellation (0=Disable,1=Enable)
[sigDet.114]
SetParm=1795,0 ! Enable Echo Cancellation (0=Disable,1=Enable)
[sigDet.115]
SetParm=1795,0 ! Enable Echo Cancellation (0=Disable,1=Enable)
[sigDet.116]
SetParm=1795,0 ! Enable Echo Cancellation (0=Disable,1=Enable)
[sigDet.117]
SetParm=1795,0 ! Enable Echo Cancellation (0=Disable,1=Enable)
[sigDet.118]
SetParm=1795,0 ! Enable Echo Cancellation (0=Disable,1=Enable)
[sigDet.119]
SetParm=1795,0 ! Enable Echo Cancellation (0=Disable,1=Enable)
[sigDet.120]
SetParm=1795,0 ! Enable Echo Cancellation (0=Disable,1=Enable)
[sigDet]
SetParm=0x705,0 ! SD_ParmDtmfTalkOffFlag (0=Disable anti-talkoff,1=Enable)
SetParm=0x707,1 ! SD_ParmModel(Def == 0, Trc == 0 and Roc501 == 1)
![lineAdmin]
!SetParm=0x1618,0x10 ! Line Admin Debug Level (0x10=Print I.431 States)
[sigBuf:0x8,0x3]
SetParm=0x800,64 ! SB_ParmInstBufferSize (Max Buffer size per instance)
[lineAdmin.1] ! Instance 1
SetParm=0x1601,2 ! LineType (dsx1_E1=2, dsx1_E1_CRC=3)
SetParm=0x1602,5 ! SignalingType (CAS=4, CCS=5, Clear=6)
SetParm=0x1603,9 ! Coding (AMI=8, HDB3=9)
! The Line Alarm Handler parameter values below are
! the E1 recommended values and ranges.
SetParm=0x160C,100 ! LOSDeclareTime millisecond (0-2.5 seconds)
SetParm=0x160D,100 ! LOSClearTime millisecond (0-2.5 seconds)
SetParm=0x160A,100 ! REDCFADeclareTime millisecond (0-2.5 seconds)
SetParm=0x160B,100 ! REDCFAClearTime millisecond (0-2.5 seconds)
SetParm=0x160E,100 ! YellowCFADeclareTime millisecond (0-2.5 seconds)
SetParm=0x160F,100 ! YellowCFAClearTime millisecond (0-2.5 seconds)
SetParm=0x1610,100 ! RAICRCCFADeclareTime millisecond (0-450 milliseconds)
SetParm=0x1611,100 ! RAICRCCFAClearTime millisecond (0-450 milliseconds)
[lineAdmin.2]
SetParm=0x1601,3 ! LineType (dsx1_E1=2, dsx1_E1_CRC=3)
SetParm=0x1602,5 ! SignalingType (CAS=4, CCS=5, Clear=6)
SetParm=0x1603,9 ! Coding (AMI=8, HDB3=9)
! The Line Alarm Handler parameter values below are
! the E1 recommended values and ranges.
SetParm=0x160C,100 ! LOSDeclareTime millisecond (0-2.5 seconds)
SetParm=0x160D,100 ! LOSClearTime millisecond (0-2.5 seconds)
SetParm=0x160A,100 ! REDCFADeclareTime millisecond (0-2.5 seconds)
SetParm=0x160B,100 ! REDCFAClearTime millisecond (0-2.5 seconds)
SetParm=0x160E,100 ! YellowCFADeclareTime millisecond (0-2.5 seconds)
SetParm=0x160F,100 ! YellowCFAClearTime millisecond (0-2.5 seconds)
SetParm=0x1610,100 ! RAICRCCFADeclareTime millisecond (0-450 milliseconds)
SetParm=0x1611,100 ! RAICRCCFAClearTime millisecond (0-450 milliseconds)
[lineAdmin.3]
SetParm=0x1601,3 ! LineType (dsx1_E1=2, dsx1_E1_CRC=3)
SetParm=0x1602,5 ! SignalingType (CAS=4, CCS=5, Clear=6)
SetParm=0x1603,9 ! Coding (AMI=8, HDB3=9)
! The Line Alarm Handler parameter values below are
! the E1 recommended values and ranges.
SetParm=0x160C,100 ! LOSDeclareTime millisecond (0-2.5 seconds)
SetParm=0x160D,100 ! LOSClearTime millisecond (0-2.5 seconds)
SetParm=0x160A,100 ! REDCFADeclareTime millisecond (0-2.5 seconds)
SetParm=0x160B,100 ! REDCFAClearTime millisecond (0-2.5 seconds)
SetParm=0x160E,100 ! YellowCFADeclareTime millisecond (0-2.5 seconds)
SetParm=0x160F,100 ! YellowCFAClearTime millisecond (0-2.5 seconds)
SetParm=0x1610,100 ! RAICRCCFADeclareTime millisecond (0-450 milliseconds)
SetParm=0x1611,100 ! RAICRCCFAClearTime millisecond (0-450 milliseconds)
!
!Luke adding configuration for lineAdmin.4
!
[lineAdmin.4]
SetParm=0x1601,3 ! LineType (dsx1_E1=2, dsx1_E1_CRC=3)
SetParm=0x1602,5 ! SignalingType (CAS=4, CCS=5, Clear=6)
SetParm=0x1603,9 ! Coding (AMI=8, HDB3=9)
! The Line Alarm Handler parameter values below are
! the E1 recommended values and ranges.
SetParm=0x160C,100 ! LOSDeclareTime millisecond (0-2.5 seconds)
SetParm=0x160D,100 ! LOSClearTime millisecond (0-2.5 seconds)
SetParm=0x160A,100 ! REDCFADeclareTime millisecond (0-2.5 seconds)
SetParm=0x160B,100 ! REDCFAClearTime millisecond (0-2.5 seconds)
SetParm=0x160E,100 ! YellowCFADeclareTime millisecond (0-2.5 seconds)
SetParm=0x160F,100 ! YellowCFAClearTime millisecond (0-2.5 seconds)
SetParm=0x1610,100 ! RAICRCCFADeclareTime millisecond (0-450 milliseconds)
SetParm=0x1611,100 ! RAICRCCFAClearTime millisecond (0-450 milliseconds)
[CCS]
SetParm=5,0xf ! Bit mapped instance count
[CCS.1]
! Q.931 Timer Values in milliseconds
Setparm=0x14,15000 ! Q.931 timer 302. Default=15000 msec.
Setparm=0x0b,4000 ! Q.931 timer 303. Default=4000 msec.
Setparm=0x0c,30000 ! Q.931 timer 304. Default=30000 msec.
Setparm=0x0d,30000 ! Q.931 timer 305. Default=30000 msec.
Setparm=0x0e,4000 ! Q.931 timer 308. Default=4000 msec.
Setparm=0x0f,10000 ! Q.931 timer 310. Default=10000 msec.
Setparm=0x10,4000 ! Q.931 timer 313. Default=4000 msec.
Setparm=0x15,400 ! TEI retry timer Default=400 msec.
Setparm=0x16,200 ! TEI state 4 min stability time. Default=200 msec.
Setparm=0x13,0 ! Symmetrical C.E. protocol. 0=disable 1=enable
Setparm=0x17,1 ! ISDN Protocol Mode. 0 = USER_MODE; 1 = NETWORK_MODE
Setparm=0x9,0 ! 0=disabled, 1=enable Layer 2 access.
! When Layer 2 access is enabled call control is no longer supported for the channels on this line.
[CCS.2]
! Q.931 Timer Values in milliseconds
Setparm=0x14,15000 ! Q.931 timer 302. Default=15000 msec.
Setparm=0x0b,4000 ! Q.931 timer 303. Default=4000 msec.
Setparm=0x0c,30000 ! Q.931 timer 304. Default=30000 msec.
Setparm=0x0d,30000 ! Q.931 timer 305. Default=30000 msec.
Setparm=0x0e,4000 ! Q.931 timer 308. Default=4000 msec.
Setparm=0x0f,10000 ! Q.931 timer 310. Default=10000 msec.
Setparm=0x10,4000 ! Q.931 timer 313. Default=4000 msec.
Setparm=0x15,400 ! TEI retry timer Default=400 msec.
Setparm=0x16,200 ! TEI state 4 min stability time. Default=200 msec.
Setparm=0x13,0 ! Symmetrical C.E. protocol. 0=disable 1=enable
Setparm=0x17,0 ! ISDN Protocol Mode. 0 = USER_MODE; 1 = NETWORK_MODE
Setparm=0x9,0 ! 0=disabled, 1=enable Layer 2 access.
! When Layer 2 access is enabled call control is no longer supported for the channels on this line.
[CCS.3]
! Q.931 Timer Values in milliseconds
Setparm=0x14,15000 ! Q.931 timer 302. Default=15000 msec.
Setparm=0x0b,4000 ! Q.931 timer 303. Default=4000 msec.
Setparm=0x0c,30000 ! Q.931 timer 304. Default=30000 msec.
Setparm=0x0d,30000 ! Q.931 timer 305. Default=30000 msec.
Setparm=0x0e,4000 ! Q.931 timer 308. Default=4000 msec.
Setparm=0x0f,10000 ! Q.931 timer 310. Default=10000 msec.
Setparm=0x10,4000 ! Q.931 timer 313. Default=4000 msec.
Setparm=0x15,400 ! TEI retry timer Default=400 msec.
Setparm=0x16,200 ! TEI state 4 min stability time. Default=200 msec.
Setparm=0x13,0 ! Symmetrical C.E. protocol. 0=disable 1=enable
Setparm=0x17,0 ! ISDN Protocol Mode. 0 = USER_MODE; 1 = NETWORK_MODE
Setparm=0x9,0 ! 0=disabled, 1=enable Layer 2 access.
! When Layer 2 access is enabled call control is no longer supported for the channels on this line.
!
!Luke adding configuration for CCS.4
!
[CCS.4]
! Q.931 Timer Values in milliseconds
Setparm=0x14,15000 ! Q.931 timer 302. Default=15000 msec.
Setparm=0x0b,4000 ! Q.931 timer 303. Default=4000 msec.
Setparm=0x0c,30000 ! Q.931 timer 304. Default=30000 msec.
Setparm=0x0d,30000 ! Q.931 timer 305. Default=30000 msec.
Setparm=0x0e,4000 ! Q.931 timer 308. Default=4000 msec.
Setparm=0x0f,10000 ! Q.931 timer 310. Default=10000 msec.
Setparm=0x10,4000 ! Q.931 timer 313. Default=4000 msec.
Setparm=0x15,400 ! TEI retry timer Default=400 msec.
Setparm=0x16,200 ! TEI state 4 min stability time. Default=200 msec.
Setparm=0x13,0 ! Symmetrical C.E. protocol. 0=disable 1=enable
Setparm=0x17,0 ! ISDN Protocol Mode. 0 = USER_MODE; 1 = NETWORK_MODE
Setparm=0x9,0 ! 0=disabled, 1=enable Layer 2 access.
! When Layer 2 access is enabled call control is no longer supported for the channels on this line.
[CHP]
SetParm=0x1310,1 ! R4 Compatibility Flag
! 0-default, 1-enable, 2-disable
Setparm=0x1311,2 ! InitialChanState. 1=InService; 2=OutOfService
! Default is 1
SetParm=0x1312,1 ! Parm DisableBlock set to (1), the Maintenance Message is NOT sent out on a B-channel status change.
! Parm DisableBlock set to (0), the Maintenance Message IS sent out on a B-channel status change.
! ISDN Protocol variant definitions
Variant VariantFormat 2 ! ISDN format (isdndefs.h)
Variant ProtocolType 7 ! 4ESS,NI2=1, 5ESS=2, DMS=3, NTT=4, NET5,QSIG=7
Variant InterCallDelay 1000 ! msecs. Time to impose between outbound calls.
Variant DisconnectTimeout 100 ! msecs. Delay between Proceeding and alert/connect.
Variant Layer1Protocol 0x03 ! G.711 Alaw
! Bearer capability layer 1 protocol
! 0x00 - protocol not present
! 0x01 - CCITT
! 0x02 - G.711 Mulaw
! 0x03 - G.711 Alaw
! 0x04 - G.721 ADPCM
! 0x05 - G.721 7KHz
! 0x06 - 384KHz video
! 0x07 - NS Rate Adaption
! 0x08 - V120 Rate Adaption
! 0x09 - X31 HDLC
Variant InfoTransferRate 0x10 ! 0x10 = 64Kb/s
! Bearer capability information transfer rate
! 0x00 - Rate undefined
! 0x10 - 64Kbs
! 0x11 - 128Kbs
! 0x13 - 384Kbs
! 0x15 - 1536Kbs
! 0x17 - 1920Kbs
! 0x18 - Multirate
Variant InfoTransferCap 0x00 ! Speech
! Bearer capability information transfer capability
! 0x00 - Speech
! 0x08 - Unrestricted digital
! 0x09 - Restricted digital
! 0x10 - 3KHz
! 0x11 - 7KHz
! 0x18 - video
Variant CalledNumberType 0x00 ! Unknown
! Called Party Number Type
! 0x00 - Unknown
! 0x01 - International
! 0x02 - National
! 0x03 - Network specific
! 0x04 - Network subscriber
! 0x06 - Network abbreviated
Variant CalledNumberPlan 0x00 ! Unknown
! Called Party Number Plan
! 0x00 - Unknown
! 0x01 - ISDN
! 0x02 - Telephony
! 0x03 - Data X.121
! 0x04 - Telex F.69
! 0x08 - National standard
! 0x09 - Private
Variant CalledNumberCount 0 ! Number of Called Number digits to expect (0=max)
Variant CallingNumberType 0x00 ! Unknown
! Calling Party Number Type
! 0x00 - Unknown
! 0x01 - International
! 0x02 - National
! 0x03 - Network specific
! 0x04 - Network subscriber
! 0x06 - Network abbreviated
Variant CallingNumberPlan 0x00 ! Unknown
! Calling Party Number Plan
! 0x00 - Unknown
! 0x01 - ISDN
! 0x02 - Telephony
! 0x03 - Data X.121
! 0x04 - Telex F.69
! 0x08 - National standard
! 0x09 - Private
Variant CallingNumberPresentation 0x00 ! Allowed
! Calling Party Number Presentation
! 0x00 - Allowed
! 0x01 - Restricted
! 0x02 - Not Available
Variant CallingNumberScreening 0x00 ! User Provided
! Calling Party Number Screening
! 0x00 - User Provided
! 0x01 - Verified and passed
! 0x02 - Verified and failed
! 0x03 - Network Provided
Variant CallingNumberCount 0 ! Number of Calling Number digits to expect (0=max)
Variant CallProgress n ! y=Allow call progress, n=disallow
Variant CaRingingSet 0x024940
Variant CaBusySet 0x004de0
Variant CaSitSet 0x02f240
Variant CaFaxSet 0x014b80
Variant CaPvdId 0x01f4c1
Variant CaPamdId 0x01a041
Variant CaSignalTimeout 2000 ! 10 msec units
Variant CaAnswerTimeout 3000 ! 10 msec units
Variant CaPvdTimeout 200 ! 10 msec units
! Define Protocol Variant 1 to use the preceeding variant parameters
Variant Define 1
Variant Define 2
[TSC]
!
! This section defines the TSC Bearer Channel sets, and any TSC related parameters.
! The bearer channel sets are used to build, populate, and configure TSP clusters.
!SetParm=0x1208,0x010 ! TSC Debugging Output level
! Bearer Channel Set Definitions
! Notes: 1. Bearer channel sets may no span multiple trunks (lines)
! 2: The bearer channel ids are arbitrary and may be
! assigned to any values in the range 0 thru 255
! inclusive, as needed by the application.
! (The bearer channel ids are assigned to the cluster
! attribute TSC_AttrChanId in each cluster).
! 3. Bearer Channel Admin group is arbitrary (client defined)
! 4. Base protocol support is not implemented. T1 is the only base available.
!defineBSet=SetId,LineId,StartChan,NumChans,BaseProtocol,Inbound,Outbound,0,Admin,1,
! BChanId, SlotId, Direction, Count, 0
! Note: Timeslot maps are used to skip timeslot 16.
! The bearer channel ids are contiguous 1 thru 30.
!
defineBSet=10,1,1,30,0,1,1,1,20,1, 1,1,3,15, 16,17,3,15, 0
defineBSet=20,2,1,30,0,1,1,1,20,1, 1,1,3,15, 16,17,3,15, 0
defineBSet=30,3,1,30,0,1,1,1,20,1, 1,1,3,15, 16,17,3,15, 0
!
! Luke adding this for 4th span
!
defineBSet=40,4,1,30,0,1,1,1,20,1, 1,1,3,15, 16,17,3,15, 0
[sigDet]
!GENERIC QUAL TEMPLATE - For R4 User Defined tones.
QualDesc QualTmpltId 6
QualDesc nfrm 3
QualDesc snr0 10
QualDesc snr1 10
QualDesc b0 2
QualDesc b1 2
QualDesc trat 10
QualDesc qmax 3
QualDesc tnfrm 0
QualDesc mask 0
QualDesc minfrm 3
QualDesc killparm 3
QualDesc longkill 3
SetQual
!ANALYSIS QUAL TEMPLATE - For R4 CALL ANALYSIS tones.
QualDesc QualTmpltId 10
QualDesc nfrm 8
QualDesc snr0 10
QualDesc snr1 10
QualDesc b0 2
QualDesc b1 2
QualDesc trat 10
QualDesc qmax 4
QualDesc tnfrm 0
QualDesc mask 0
QualDesc minfrm 3
QualDesc killparm 3
QualDesc longkill 3
SetQual
is that any thing wrong with that, the issue is urgent, can any one help in this regard.
thanks
taylor
To reply: mailto:General.31113 (at) pysdiscussext.py.intel.com
To start a new topic: mailto:General (at) pysdiscussext.py.intel.com
To login: http://membersresource.intel.com/webboardnet/wb.aspx?board=general