By Date: <-- -->
By Thread: <-- -->

SS7SPCI4 dailogic board configuration for sms

From: "Nauman Jamil" <itsnomihere (at) hotmail.com>



hi 
i m very new to sms developmetn n need some help .
i m workin for cdma based n/w 
1) i m trying to run istr program (example program to recive sms data from is41)but whenever i send sms from cdma set istr shows nuthin .
2) do i need to run DCM else than gctload program
3) when i run gctload program it gives following message

pcm loss
level 2 state out of service 

but after s7mgt boot message
it gives 
pcm ok 
remote alarm cleard

pls if some one can review these configuration n tell me what i m doing wrong



config
=========
SEPTELCP_BOARD  0  0x0043  ss7.dc3 IS41
MTP_CONFIG 0 0 0x40d04
LIU_CONFIG  0  0  5  1  2  2
MTP_LINKSET  0  5204  1  0x0000 5217 0xb
MTP_LINK  0  0  0  0  0  0  0x0  16  0x0006
MTP_ROUTE  5204  0  0x0008
MTP_USER_PART  0x03  0x33

system.txt
==========
LOCAL           0x20            * ssd - Board Interface task
LOCAL           0x00            * Timer Task
* Optional modules running on the host:
LOCAL           0xef            * s7_log - logs messages
LOCAL           0x3d            * ISTR
LOCAL           0xcf            * s7_mgt - Management/config task
LOCAL           0x33            * SCCP
LOCAL           0x14            * TCAP module
LOCAL           0x25            * IS41
* Modules running on the board (all redirected via ssd):
REDIRECT        0x22    0x20    * MTP3 module
REDIRECT        0x71    0x20    * MTP2 module
REDIRECT        0x10    0x20    * MVIP/SCbus/Clocking control module
REDIRECT        0x8e    0x20    * On-board management task
* Redirection of status:
REDIRECT        0xdf    0xef    * LIU/MTP2 status messages to s7_log
REDIRECT        0x9e    0xef
* Now start-up all local tasks:
FORK_PROCESS    SSDS.EXE -d
FORK_PROCESS    TIM_NT.EXE
FORK_PROCESS    TICK_NT.EXE
FORK_PROCESS    SCP_NT.EXE -t
FORK_PROCESS    TCP_NT.EXE -t
FORK_PROCESS    IS41_NT.EXE -t
FORK_PROCESS    S7_MGT.EXE
FORK_PROCESS    S7_LOG.EXE
FORK_PROCESS    istrmain.EXE


thanx alot 10000 million times






To reply: mailto:General.31136 (at) pysdiscussext.py.intel.com
To start a new topic: mailto:General (at) pysdiscussext.py.intel.com
To login: http://membersresource.intel.com/webboardnet/wb.aspx?board=general