By Date:	<-- -->
By Thread:	<-- -->

pinnacle 310i Problems maybe i2c

From: KevinLuX <kevinlux (at) karondimonio.it>
Date: Sat, 11 Feb 2006 11:14:08 +0100

KevinLuX wrote:


after you logged in :

modprobe tuner
modprobe saa7134 card=77
and look at your dmesg.
and everythinks gonna be allright!

Here some tips from hermann (without him i was lost! Still thanks)

After modprobe -r the related modules first do "modprobe tuner debug=1".
Then you can try "modprobe -v saa7134 card=77 i2c_debug=1" to see if
hidden options slipped into your modprobe and where the i2c
communication fails. DVB-T doesn't work yet on the card and also tvtime
doesn't support it.

Hi all, first of all one question...there's a hope that one day this card will work in dvb mode?? Now here i specify that the card __*works*__ perfectly in analog mode, but in the dmest i have still errors . what append?

after
modprobe tuner=1
modprove saa7134 card=77

mydmesg:

i2c-core: driver [tuner] registered
Linux video capture interface: v1.00
i2c-core: driver [ir-kbd-i2c] registered
saa7130/34: v4l2 driver version 0.2.14 loaded
ACPI: PCI Interrupt Link [LNK2] enabled at IRQ 5
ACPI: PCI Interrupt 0000:01:09.0[A] -> Link [LNK2] -> GSI 5 (level, low) -> IRQ 5
saa7133[0]: found at 0000:01:09.0, rev: 208, irq: 5, latency: 32, mmio: 0xd8100000
saa7133[0]: subsystem: 11bd:002f, board: Pinnacle PCTV 110i (saa7133) [card=77,insmod option]
saa7133[0]: board init: gpio is 600e000
i2c_adapter i2c-2: adapter [saa7133[0]] registered
i2c_adapter i2c-2: found normal entry for adapter 2, addr 0x42
i2c_adapter i2c-2: master_xfer[0] W, addr=0x42, len=0
i2c_adapter i2c-2: found normal entry for adapter 2, addr 0x43
i2c_adapter i2c-2: master_xfer[0] W, addr=0x43, len=0
i2c_adapter i2c-2: found normal entry for adapter 2, addr 0x4a
i2c_adapter i2c-2: master_xfer[0] W, addr=0x4a, len=0
i2c_adapter i2c-2: found normal entry for adapter 2, addr 0x4b
i2c_adapter i2c-2: master_xfer[0] W, addr=0x4b, len=0
i2c_adapter i2c-2: master_xfer[0] W, addr=0x4b, len=2
i2c_adapter i2c-2: master_xfer[0] W, addr=0x4b, len=2
i2c_adapter i2c-2: master_xfer[0] W, addr=0x4b, len=1
i2c_adapter i2c-2: master_xfer[0] R, addr=0x4b, len=1
i2c_adapter i2c-2: master_xfer[0] W, addr=0x4b, len=2
i2c_adapter i2c-2: master_xfer[0] W, addr=0x4b, len=2
i2c_adapter i2c-2: master_xfer[0] W, addr=0x4b, len=1
i2c_adapter i2c-2: master_xfer[0] R, addr=0x4b, len=1
tuner 2-004b: chip found  (at)  0x96 (saa7133[0])
i2c_adapter i2c-2: client [(tuner unset)] registered with bus id 2-004b
i2c_adapter i2c-2: master_xfer[0] W, addr=0x4b, len=2
i2c_adapter i2c-2: master_xfer[0] R, addr=0x60, len=1
i2c_adapter i2c-2: master_xfer[0] R, addr=0x61, len=1
i2c_adapter i2c-2: master_xfer[0] R, addr=0x62, len=1
i2c_adapter i2c-2: master_xfer[0] R, addr=0x63, len=1
i2c_adapter i2c-2: master_xfer[0] W, addr=0x4b, len=2
tuner 2-004b: setting tuner address to 61
i2c_adapter i2c-2: master_xfer[0] W, addr=0x4b, len=2
i2c_adapter i2c-2: master_xfer[0] R, addr=0x61, len=1
tuner 2-004b: tuner: type set to tda8290+75a             <--  TUNER CORRECTLY INTIALIZED
i2c_adapter i2c-2: master_xfer[0] W, addr=0x4b, len=2
i2c_adapter i2c-2: master_xfer[0] W, addr=0x61, len=14
i2c_adapter i2c-2: master_xfer[0] W, addr=0x4b, len=2
i2c_adapter i2c-2: master_xfer[0] W, addr=0x4b, len=2
i2c_adapter i2c-2: master_xfer[0] W, addr=0x4b, len=2
i2c_adapter i2c-2: found normal entry for adapter 2, addr 0x60
i2c_adapter i2c-2: master_xfer[0] W, addr=0x60, len=0
i2c_adapter i2c-2: found normal entry for adapter 2, addr 0x61
i2c_adapter i2c-2: master_xfer[0] W, addr=0x61, len=0
i2c_adapter i2c-2: found normal entry for adapter 2, addr 0x62
i2c_adapter i2c-2: master_xfer[0] W, addr=0x62, len=0
i2c_adapter i2c-2: found normal entry for adapter 2, addr 0x63
i2c_adapter i2c-2: master_xfer[0] W, addr=0x63, len=0
i2c_adapter i2c-2: found normal entry for adapter 2, addr 0x64
i2c_adapter i2c-2: master_xfer[0] W, addr=0x64, len=0
i2c_adapter i2c-2: found normal entry for adapter 2, addr 0x65
i2c_adapter i2c-2: master_xfer[0] W, addr=0x65, len=0
i2c_adapter i2c-2: found normal entry for adapter 2, addr 0x66
i2c_adapter i2c-2: master_xfer[0] W, addr=0x66, len=0
i2c_adapter i2c-2: found normal entry for adapter 2, addr 0x67
i2c_adapter i2c-2: master_xfer[0] W, addr=0x67, len=0
i2c_adapter i2c-2: found normal entry for adapter 2, addr 0x68
i2c_adapter i2c-2: master_xfer[0] W, addr=0x68, len=0
i2c_adapter i2c-2: found normal entry for adapter 2, addr 0x69
i2c_adapter i2c-2: master_xfer[0] W, addr=0x69, len=0
i2c_adapter i2c-2: found normal entry for adapter 2, addr 0x6a
i2c_adapter i2c-2: master_xfer[0] W, addr=0x6a, len=0
i2c_adapter i2c-2: found normal entry for adapter 2, addr 0x6b
i2c_adapter i2c-2: master_xfer[0] W, addr=0x6b, len=0
i2c_adapter i2c-2: found normal entry for adapter 2, addr 0x6c
i2c_adapter i2c-2: master_xfer[0] W, addr=0x6c, len=0
i2c_adapter i2c-2: found normal entry for adapter 2, addr 0x6d
i2c_adapter i2c-2: master_xfer[0] W, addr=0x6d, len=0
i2c_adapter i2c-2: found normal entry for adapter 2, addr 0x6e
i2c_adapter i2c-2: master_xfer[0] W, addr=0x6e, len=0
i2c_adapter i2c-2: found normal entry for adapter 2, addr 0x6f
i2c_adapter i2c-2: master_xfer[0] W, addr=0x6f, len=0
i2c_adapter i2c-2: master_xfer[0] R, addr=0x7a, len=0
i2c_adapter i2c-2: master_xfer[0] R, addr=0x47, len=0
i2c_adapter i2c-2: client [Pinnacle PCTV] registered with bus id 2-0047
input: Pinnacle PCTV as /class/input/input4
ir-kbd-i2c: Pinnacle PCTV detected at i2c-2/2-0047/ir0 [saa7133[0]]
i2c_adapter i2c-2: master_xfer[0] W, addr=0x50, len=1
i2c_adapter i2c-2: master_xfer[0] R, addr=0x47, len=4
i2c_adapter i2c-2: master_xfer[0] R, addr=0x50, len=128
saa7133[0]: i2c eeprom read error (err=-5)        /// <--------------***** here eeprom error :|
i2c_adapter i2c-2: master_xfer[0] W, addr=0x4b, len=2
i2c_adapter i2c-2: master_xfer[0] W, addr=0x4b, len=2
i2c_adapter i2c-2: master_xfer[0] W, addr=0x4b, len=2
i2c_adapter i2c-2: master_xfer[0] W, addr=0x4b, len=2
i2c_adapter i2c-2: master_xfer[0] W, addr=0x4b, len=2
i2c_adapter i2c-2: master_xfer[0] W, addr=0x4b, len=2
i2c_adapter i2c-2: master_xfer[0] W, addr=0x4b, len=2
i2c_adapter i2c-2: master_xfer[0] W, addr=0x4b, len=2
i2c_adapter i2c-2: master_xfer[0] W, addr=0x61, len=14
i2c_adapter i2c-2: master_xfer[0] W, addr=0x61, len=2
i2c_adapter i2c-2: master_xfer[0] W, addr=0x61, len=2
i2c_adapter i2c-2: master_xfer[0] W, addr=0x61, len=2
i2c_adapter i2c-2: master_xfer[0] R, addr=0x47, len=4
i2c_adapter i2c-2: master_xfer[0] R, addr=0x47, len=4
............

--
video4linux-list mailing list
Unsubscribe mailto:video4linux-list-request (at) redhat.com?subject=unsubscribe
https://www.redhat.com/mailman/listinfo/video4linux-list

Follow-Ups:
- pinnacle 310i Problems maybe i2c
  - From: Hartmut Hackmann <hartmut.hackmann (at) t-online.de>

References:
- pinnacle 310i Problems maybe i2c
  - From: KevinLuX <kevinlux (at) karondimonio.it>
- pinnacle 310i Problems maybe i2c
  - From: hermann pitton <hermann.pitton (at) onlinehome.de>
- pinnacle 310i Problems maybe i2c
  - From: KevinLuX <kevinlux (at) karondimonio.it>
- pinnacle 310i Problems maybe i2c
  - From: hermann pitton <hermann.pitton (at) onlinehome.de>
- pinnacle 310i Problems maybe i2c
  - From: KevinLuX <kevinlux (at) karondimonio.it>

Prev by Date: Pinnacle PCTV40i analogue noise with recent kernel versions
Next by Date: Trying to get a Kworld-ATSC110 working
Previous by thread: pinnacle 310i Problems maybe i2c
Next by thread: pinnacle 310i Problems maybe i2c
Index(es):
- Main
- Thread