bttv msp34xx errors...
- From: samuel verstraete <samuel.verstraete (at) gmail.com>
- Date: Fri, 10 Mar 2006 08:45:52 +0100
After further investigation (and reading documentation, my bad) i found
out that i had to load firmware :)
now i have the problem that the option given in the documentation is
not an option of bttv...
when i "modprobe bttv card=80 firm_altera="/etc/pvr/hcwamc.rbf" it
gives me the message that firm_altera is not an option of the module
bttv and decides to ignore that option... anything else i'm doing wrong?
On Mon, 6 Mar 2006 18:22:41 +0100
"samuel verstraete" <samuel.verstraete (at) gmail.com> wrote:
> hello dear list,
>
> i found this pretty old Hauppauge PVR card... All it says is
> Hauppauge PVR pci. It has a bttv chip and tuning works perfectly...
> but surprise, surprise sound doesn't work...
> this is the output if i modprobe the bttv module... so even it clearly
> states that a MSP3415 audio processor is found, checking th msp34xx
> module doesn't work... i have tried to load that msp34xx module before
> or after the bttv module... all to no avail..
> kernel is 2.6.15.4 with alsa...
> any suggestions?
>
> gr,s.
>
> output of bttv modprobe :
>
> bttv: driver version 0.9.16 loaded
> bttv: using 8 buffers with 2080k (520 pages) each for capture
> bttv: Bt8xx card found (0).
> ACPI: PCI Interrupt 0000:01:08.0[A] -> Link [LNK1] -> GSI 5 (level,
> low) -> IRQ 5
> bttv0: Bt878 (rev 17) at 0000:01:08.0, irq: 5, latency: 32, mmio:
> 0xd4000000 bttv0: detected: Hauppauge WinTV [card=10], PCI subsystem
> ID is 0070:13eb bttv0: using: Hauppauge (bt878) [card=10,autodetected]
> bttv0: gpio: en=00000000, out=00000000 in=00ffffff [init]
> bttv0: Hauppauge/Voodoo msp34xx: reset line init [5]
> tuner 0-0061: chip found (at) 0xc2 (bt878 #0 [sw])
> tveeprom 0-0050: Hauppauge model 45234, rev D542, serial# 6015097
> tveeprom 0-0050: tuner model is Temic 4009FR5 (idx 42, type 20)
> tveeprom 0-0050: TV standards PAL(B/G) (eeprom 0x04)
> tveeprom 0-0050: audio processor is MSP3415 (idx 6)
> tveeprom 0-0050: has radio
> bttv0: using tuner=20
> tuner 0-0061: type set to 20 (Temic PAL_BG (4009 FR5) or PAL_I (4069
> FR5)) bttv0: i2c: checking for MSP34xx (at) 0x80... not found
> bttv0: i2c: checking for TDA9875 (at) 0xb0... not found
> bttv0: i2c: checking for TDA7432 (at) 0x8a... not found
> bttv0: i2c: checking for TDA9887 (at) 0x86... not found
> bttv0: registered device video0
> bttv0: registered device vbi0
> bttv0: registered device radio0
> bttv0: PLL: 28636363 => 35468950 . ok
--
--
video4linux-list mailing list
Unsubscribe mailto:video4linux-list-request (at) redhat.com?subject=unsubscribe
https://www.redhat.com/mailman/listinfo/video4linux-list