terratec 1400 DVB-T composite/s-video
- From: Roberto Ugoccioni <r.ugoccioni (at) tiscali.it>
- Date: Sat, 11 Mar 2006 19:36:56 +0100
Hello,
I own a Terratec Cinergy 1400 DVB-T.
The DVB-T part works fine (Fedora Core 4, kernel 2.6.14), but the card
also has a S-Video/Composite input which I cannot make work.
On the web I found no indications of some particular configuration I need
nor that the svideo input is not supported for this card. I would like to know which is case, because I want to transfer some vhs tapes to dvd.
Thanks,
Roberto
////////////
Card info:
~> v4lctl list
attribute | type | current | default | comment
-----------+--------+---------+---------+-------------------------------------
norm | choice | NTSC-M | NTSC-M | NTSC-M NTSC-JP PAL-BG PAL-DK
PAL-I PAL-M PAL-N PAL-Nc PAL-60 SECAM-L SECAM-DK
input | choice | DVB | DVB | DVB
audio mode | choice | mono | mono | mono stereo lang1 lang2
bright | int | 128 | 0 | range is 0 => 255
contrast | int | 128 | 0 | range is 0 => 255
color | int | 127 | 0 | range is 0 => 255
hue | int | 128 | 0 | range is 0 => 255
volume | int | 63 | 0 | range is 0 => 63
Balance | int | 64 | 64 | range is 0 => 127
mute | bool | on | off |
~> lspci -v -s 05:07.*
05:07.0 Multimedia video controller: Conexant CX23880/1/2/3 PCI Video
and Audio Decoder (rev 05) Subsystem: TERRATEC Electronic GmbH: Unknown
device 1166 Flags: bus master, medium devsel, latency 32, IRQ 3
Memory at d8000000 (32-bit, non-prefetchable) [size=16M]
Capabilities: [44] Vital Product Data
Capabilities: [4c] Power Management version 2
05:07.2 Multimedia controller: Conexant CX23880/1/2/3 PCI Video and
Audio Decoder [MPEG Port] (rev 05) Subsystem: TERRATEC Electronic GmbH:
Unknown device 1166 Flags: bus master, medium devsel, latency 32, IRQ 3
Memory at d9000000 (32-bit, non-prefetchable) [size=16M]
Capabilities: [4c] Power Management version 2
~> cat /var/log/messages
kernel: Linux video capture interface: v1.00
kernel: cx2388x dvb driver version 0.0.5 loaded
kernel: CORE cx88[0]: subsystem: 153b:1166, board: TerraTec Cinergy
1400 DVB-T [card=30,autodetected] kernel: TV tuner 4 at 0x00, Radio
tuner 0 at 0x00 kernel: cx88[0]: registered IR remote control
kernel: ACPI: PCI Interrupt 0000:05:07.2[A] -> Link [LNK2] -> GSI 3
(level, low) -> IRQ 3 kernel: cx88[0]/2: found at 0000:05:07.2, rev: 5,
irq: 3, latency: 32, mmio: 0xd9000000 kernel: cx88[0]/2: cx2388x based
dvb card kernel: DVB: registering new adapter (cx88[0]).
kernel: DVB: registering frontend 0 (Conexant CX22702 DVB-T)...
kernel: cx2388x v4l2 driver version 0.0.5 loaded
kernel: ACPI: PCI Interrupt 0000:05:07.0[A] -> Link [LNK2] -> GSI 3
(level, low) -> IRQ 3 kernel: cx88[0]/0: found at 0000:05:07.0, rev: 5,
irq: 3, latency: 32, mmio: 0xd8000000 kernel: cx88[0]/0: registered
device video0 [v4l2] kernel: cx88[0]/0: registered device vbi0
kernel: ACPI: PCI Interrupt Link [LUB2] enabled at IRQ 3
kernel: ACPI: PCI Interrupt 0000:00:02.1[B] -> Link [LUB2] -> GSI 3
(level, low) -> IRQ 3
--
video4linux-list mailing list
Unsubscribe mailto:video4linux-list-request (at) redhat.com?subject=unsubscribe
https://www.redhat.com/mailman/listinfo/video4linux-list