By Date: <-- -->
By Thread: <-- -->

bttv msp3400 2.6.15.6 - > 2.6.16 stereo stop working

Hans Verkuil napsal(a): 
On Sunday 26 March 2006 00:01, Hans Verkuil wrote:

On Saturday 25 March 2006 23:40, Daniel Smolik wrote:

Hi,

I have Miro PCTV pro (card=11) with msp3400 module. I use xawtv in
grabdisplay mode (overlay is buggy on my mobo) on 2.6.15.6 xwatv
shows that work in stereo when I switch to 2.6.16 xawtv shows only
mono :-(. I run msp3400 in debug=3 and I mean that stereo is
working. Carriers are proper detected, but why xawtv now doesn't
show correct info ?


Hmm, the audio mode is not initialized to a good default by
msp3400. Switching the mode to stereo will work fine for you, it's
just back to mono each time you boot. I see it is fixed for 2.6.17.

I'll see if I can get this in the next 2.6.16.X release, no
guarantees though.

Thanks for pointing this out! I'm to blame for it too :-(


Scratch this. I can't reproduce this. If I choose a channel in my WinTV card it will switch to the correct mono/stereo/lang1 string after some 5 seconds.

What MSP3400 version do you have? (shown in the kernel log)

Yes I can switch to stereo or lang1 and after 5sec will swicth back to mono :-(.
There is may log for 2.6.15.6: If you want I switch to 2.6.16 and send you output.

CPI: PCI Interrupt 0000:00:09.0[A] -> GSI 17 (level, low) -> IRQ 22
bttv0: Bt848 (rev 18) at 0000:00:09.0, irq: 22, latency: 32, mmio: 0xe3006000
bttv0: using: MIRO PCTV pro [card=11,insmod option]
bttv0: gpio: en=00000000, out=00000000 in=00e707df [init]
msp3400 debug 1-0040: rev1=0x0503, rev2=0x0a1b
msp3400 debug 1-0040: setvolume: mute=off 58880:58880 v=0x67 b=0x00
msp3400 1-0040: chip=MSP3410C-E27 +nicam mode=manual
msp3400 1-0040: msp3400 daemon started
msp3400 debug 1-0040: msp3400 thread: sleep
msp3400 debug 1-0040: setvolume: mute=off 0:0 v=0x00 b=0x00
msp3400 debug 1-0040: msp3400 thread: wakeup
msp3400 debug 1-0040: thread: restart scan
msp3400 debug 1-0040: setvolume: mute=off 0:0 v=0x00 b=0x00
msp3400 debug 1-0040: setmode: 0
tuner 1-0060: All bytes are equal. It is not a TEA5767
tuner 1-0060: chip found (at) 0xc0 (bt848 #0 [sw])
tuner 1-0061: chip found (at) 0xc2 (bt848 #0 [sw])
bttv0: i2c: checking for MSP34xx (at) 0x80... found
msp3400 debug 1-0040: AUDC_SET_INPUT(4)
msp3400 debug 1-0040: setvolume: mute=off 0:0 v=0x00 b=0x00
msp3400 debug 1-0040: thread: restart scan
msp3400 debug 1-0040: setvolume: mute=off 0:0 v=0x00 b=0x00
msp3400 debug 1-0040: setmode: 0
msp3400 debug 1-0040: AUDC_SET_INPUT(4)
msp3400 debug 1-0040: VIDIOCSCHAN (norm=0)
msp3400 debug 1-0040: setvolume: mute=off 0:0 v=0x00 b=0x00
msp3400 debug 1-0040: thread: restart scan
msp3400 debug 1-0040: setvolume: mute=off 0:0 v=0x00 b=0x00
msp3400 debug 1-0040: setmode: 0
msp3400 debug 1-0040: carrier1 val: 727 / 4.5 NTSC
msp3400 debug 1-0040: carrier1 val: 908 / 5.5 PAL B/G
msp3400 debug 1-0040: carrier1 val: 977 / 6.0 PAL I
msp3400 debug 1-0040: carrier1 val: 1691 / 6.5 PAL D/K + SAT + SECAM
msp3400 debug 1-0040: carrier2 val: 1063 / 5.85 PAL D/K + SECAM NICAM
msp3400 debug 1-0040: carrier2 val: 1251 / 6.25 PAL D/K1 FM-stereo
msp3400 debug 1-0040: carrier2 val: 1129 / 6.74 PAL D/K2 FM-stereo
msp3400 debug 1-0040: carrier2 val: 1275 / 7.02 PAL SAT FM-stereo s/b
msp3400 debug 1-0040: carrier2 val: 1074 / 7.20 PAL SAT FM-stereo s
msp3400 debug 1-0040: msp3400 debug 1-0040: carrier1 val: 288 / 4.5 NTSC
msp3400 debug 1-0040: carrier1 val: 6899 / 5.5 PAL B/G
msp3400 debug 1-0040: carrier1 val: 1177 / 6.0 PAL I
msp3400 debug 1-0040: carrier1 val: 379 / 6.5 PAL D/K + SAT + SECAM
msp3400 debug 1-0040: carrier2 val: 5728 / 5.742 PAL B/G FM-stereo
msp3400 debug 1-0040: carrier2 val: 1110 / 5.85 PAL B/G NICAM
msp3400 debug 1-0040: setmode: 3
msp3400 debug 1-0040: FM setstereo: 0
msp3400 debug 1-0040: setstereo final source/matrix = 0x0
msp3400 debug 1-0040: setvolume: mute=off 58880:58880 v=0x67 b=0x00
msp3400 debug 1-0040: main sound carrier: 5.501 MHz
msp3400 debug 1-0040: FM-stereo carrier : 5.743 MHz
msp3400 debug 1-0040: VIDIOCGAUDIO
carrier2 val: 1117 / 7.38 PAL SAT FM-stereo b


















msp3400 debug 1-0040: setmode: 3
msp3400 debug 1-0040: FM setstereo: 0






	Hans

--
video4linux-list mailing list
Unsubscribe mailto:video4linux-list-request (at) redhat.com?subject=unsubscribe
https://www.redhat.com/mailman/listinfo/video4linux-list


--
video4linux-list mailing list
Unsubscribe mailto:video4linux-list-request (at) redhat.com?subject=unsubscribe
https://www.redhat.com/mailman/listinfo/video4linux-list