bttv msp3400 2.6.15.6 - > 2.6.16 stereo stop working
- From: Hans Verkuil <hverkuil (at) xs4all.nl>
- Date: Sun, 26 Mar 2006 12:16:45 +0200
Is this log all you get when running xawtv in 2.6.15? Can you make
another log, this time starting xawtv, select a stereo channel and wait
30 seconds, then select LANG1 as audio mode, wait another 30 seconds,
then go back to stereo and wait another 30 seconds before closing down.
Can you mail me (off-list) the log from the /var/log/messages file as
that includes timestamps. Please also run the same procedure again for
2.6.16.
Thanks,
Hans
On Sunday 26 March 2006 09:14, Daniel Smolik wrote:
> Hans Verkuil napsal(a):
> > On Sunday 26 March 2006 00:01, Hans Verkuil wrote:
> >>On Saturday 25 March 2006 23:40, Daniel Smolik wrote:
> >>>Hi,
> >>>
> >>>I have Miro PCTV pro (card=11) with msp3400 module. I use xawtv in
> >>>grabdisplay mode (overlay is buggy on my mobo) on 2.6.15.6 xwatv
> >>>shows that work in stereo when I switch to 2.6.16 xawtv shows only
> >>>mono :-(. I run msp3400 in debug=3 and I mean that stereo is
> >>>working. Carriers are proper detected, but why xawtv now doesn't
> >>>show correct info ?
> >>
> >>Hmm, the audio mode is not initialized to a good default by
> >>msp3400. Switching the mode to stereo will work fine for you, it's
> >>just back to mono each time you boot. I see it is fixed for 2.6.17.
> >>
> >>I'll see if I can get this in the next 2.6.16.X release, no
> >>guarantees though.
> >>
> >>Thanks for pointing this out! I'm to blame for it too :-(
> >
> > Scratch this. I can't reproduce this. If I choose a channel in my
> > WinTV card it will switch to the correct mono/stereo/lang1 string
> > after some 5 seconds.
> >
> > What MSP3400 version do you have? (shown in the kernel log)
>
> Yes I can switch to stereo or lang1 and after 5sec will swicth back
> to mono :-(.
> There is may log for 2.6.15.6: If you want I switch to 2.6.16 and
> send you output.
>
> CPI: PCI Interrupt 0000:00:09.0[A] -> GSI 17 (level, low) -> IRQ 22
> bttv0: Bt848 (rev 18) at 0000:00:09.0, irq: 22, latency: 32, mmio:
> 0xe3006000
> bttv0: using: MIRO PCTV pro [card=11,insmod option]
> bttv0: gpio: en=00000000, out=00000000 in=00e707df [init]
> msp3400 debug 1-0040: rev1=0x0503, rev2=0x0a1b
> msp3400 debug 1-0040: setvolume: mute=off 58880:58880 v=0x67 b=0x00
> msp3400 1-0040: chip=MSP3410C-E27 +nicam mode=manual
> msp3400 1-0040: msp3400 daemon started
> msp3400 debug 1-0040: msp3400 thread: sleep
> msp3400 debug 1-0040: setvolume: mute=off 0:0 v=0x00 b=0x00
> msp3400 debug 1-0040: msp3400 thread: wakeup
> msp3400 debug 1-0040: thread: restart scan
> msp3400 debug 1-0040: setvolume: mute=off 0:0 v=0x00 b=0x00
> msp3400 debug 1-0040: setmode: 0
> tuner 1-0060: All bytes are equal. It is not a TEA5767
> tuner 1-0060: chip found (at) 0xc0 (bt848 #0 [sw])
> tuner 1-0061: chip found (at) 0xc2 (bt848 #0 [sw])
> bttv0: i2c: checking for MSP34xx (at) 0x80... found
> msp3400 debug 1-0040: AUDC_SET_INPUT(4)
> msp3400 debug 1-0040: setvolume: mute=off 0:0 v=0x00 b=0x00
> msp3400 debug 1-0040: thread: restart scan
> msp3400 debug 1-0040: setvolume: mute=off 0:0 v=0x00 b=0x00
> msp3400 debug 1-0040: setmode: 0
> msp3400 debug 1-0040: AUDC_SET_INPUT(4)
> msp3400 debug 1-0040: VIDIOCSCHAN (norm=0)
> msp3400 debug 1-0040: setvolume: mute=off 0:0 v=0x00 b=0x00
> msp3400 debug 1-0040: thread: restart scan
> msp3400 debug 1-0040: setvolume: mute=off 0:0 v=0x00 b=0x00
> msp3400 debug 1-0040: setmode: 0
> msp3400 debug 1-0040: carrier1 val: 727 / 4.5 NTSC
> msp3400 debug 1-0040: carrier1 val: 908 / 5.5 PAL B/G
> msp3400 debug 1-0040: carrier1 val: 977 / 6.0 PAL I
> msp3400 debug 1-0040: carrier1 val: 1691 / 6.5 PAL D/K + SAT +
> SECAM msp3400 debug 1-0040: carrier2 val: 1063 / 5.85 PAL D/K +
> SECAM NICAM msp3400 debug 1-0040: carrier2 val: 1251 / 6.25 PAL
> D/K1 FM-stereo msp3400 debug 1-0040: carrier2 val: 1129 / 6.74 PAL
> D/K2 FM-stereo msp3400 debug 1-0040: carrier2 val: 1275 / 7.02 PAL
> SAT FM-stereo s/b msp3400 debug 1-0040: carrier2 val: 1074 / 7.20
> PAL SAT FM-stereo s msp3400 debug 1-0040: msp3400 debug 1-0040:
> carrier1 val: 288 / 4.5 NTSC
> msp3400 debug 1-0040: carrier1 val: 6899 / 5.5 PAL B/G
> msp3400 debug 1-0040: carrier1 val: 1177 / 6.0 PAL I
> msp3400 debug 1-0040: carrier1 val: 379 / 6.5 PAL D/K + SAT +
> SECAM msp3400 debug 1-0040: carrier2 val: 5728 / 5.742 PAL B/G
> FM-stereo msp3400 debug 1-0040: carrier2 val: 1110 / 5.85 PAL B/G
> NICAM msp3400 debug 1-0040: setmode: 3
> msp3400 debug 1-0040: FM setstereo: 0
> msp3400 debug 1-0040: setstereo final source/matrix = 0x0
> msp3400 debug 1-0040: setvolume: mute=off 58880:58880 v=0x67 b=0x00
> msp3400 debug 1-0040: main sound carrier: 5.501 MHz
> msp3400 debug 1-0040: FM-stereo carrier : 5.743 MHz
> msp3400 debug 1-0040: VIDIOCGAUDIO
> carrier2 val: 1117 / 7.38 PAL SAT FM-stereo b
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
> msp3400 debug 1-0040: setmode: 3
> msp3400 debug 1-0040: FM setstereo: 0
>
> > Hans
> >
> > --
> > video4linux-list mailing list
> > Unsubscribe
> > mailto:video4linux-list-request (at) redhat.com?subject=unsubscribe
> > https://www.redhat.com/mailman/listinfo/video4linux-list
>
> --
> video4linux-list mailing list
> Unsubscribe
> mailto:video4linux-list-request (at) redhat.com?subject=unsubscribe
> https://www.redhat.com/mailman/listinfo/video4linux-list
--
video4linux-list mailing list
Unsubscribe mailto:video4linux-list-request (at) redhat.com?subject=unsubscribe
https://www.redhat.com/mailman/listinfo/video4linux-list