By Date: <-- -->
By Thread: <-- -->

TV (at) nywhere DUO

Hi Sigurdur!

The MSI DUO card is yet another badge job on a LifeView card - this time the 
LR306 "FlyDVB-T Duo".

In case we already have support for the LifeView-branded incarnation of this 
device (I think we do), it's just a matter of adding the PCI ID and the 
pointer to the existing card structure.

Maintainers, over to you!

regards,
Peter

On Wednesday 29 March 2006 16:29, Sigurdur Sigurdsson wrote:
> Hi
>
> I have the MSI DUO card (and BT878).
>
> It would be great to have it supported.
>
> Hope this helps.
>
> Thanks,
> Sigurdur Sigurdsson (Siggi)
> sigsig1 (at) simnet.is
>
>
> Here is lspci:
> localhost ~ # lspci
> 00:00.0 Host bridge: Intel Corporation 945G/GZ/P/PL Express Memory
> Controller Hub (rev 81)
> 00:01.0 PCI bridge: Intel Corporation 945G/GZ/P/PL Express PCI Express
> Root Port (rev 81)
> 00:1b.0 Audio device: Intel Corporation 82801G (ICH7 Family) High
> Definition Audio Controller (rev 01)
> 00:1c.0 PCI bridge: Intel Corporation 82801G (ICH7 Family) PCI Express
> Port 1 (rev 01)
> 00:1c.2 PCI bridge: Intel Corporation 82801G (ICH7 Family) PCI Express
> Port 3 (rev 01)
> 00:1d.0 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI
> #1 (rev 01)
> 00:1d.1 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI
> #2 (rev 01)
> 00:1d.2 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI
> #3 (rev 01)
> 00:1d.3 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI
> #4 (rev 01)
> 00:1d.7 USB Controller: Intel Corporation 82801G (ICH7 Family) USB2 EHCI
> Controller (rev 01)
> 00:1e.0 PCI bridge: Intel Corporation 82801 PCI Bridge (rev e1)
> 00:1f.0 ISA bridge: Intel Corporation 82801GB/GR (ICH7 Family) LPC
> Interface Bridge (rev 01)
> 00:1f.1 IDE interface: Intel Corporation 82801G (ICH7 Family) IDE
> Controller (rev 01)
> 00:1f.2 IDE interface: Intel Corporation 82801GB/GR/GH (ICH7 Family)
> Serial ATA Storage Controller IDE (rev 01)
> 00:1f.3 SMBus: Intel Corporation 82801G (ICH7 Family) SMBus Controller
> (rev 01)
> 01:00.0 VGA compatible controller: nVidia Corporation NV43 [GeForce 6600
> GT] (rev a2)
> 03:00.0 Ethernet controller: Intel Corporation 82573V Gigabit Ethernet
> Controller (Copper) (rev 03)
> 04:00.0 Multimedia controller: Philips Semiconductors SAA7133/SAA7135
> Video Broadcast Decoder (rev f0)
> 04:01.0 Multimedia video controller: Brooktree Corporation Bt878 Video
> Capture (rev 11)
> 04:01.1 Multimedia controller: Brooktree Corporation Bt878 Audio Capture
> (rev 11)
>
>
> And dmesg
>
> localhost ~ # dmesg
> Linux version 2.6.15-gentoo-r1 (root (at) localhost) (gcc version 3.4.5
> (Gentoo 3.4.5, ssp-3.4.5-1.0, pie-8.7.9)) #1 SMP Wed Mar 29 05:27:18 GMT
> 2006
> .....
> Linux video capture interface: v1.00
> saa7130/34: v4l2 driver version 0.2.14 loaded
> ACPI: PCI Interrupt 0000:04:00.0[A] -> GSI 16 (level, low) -> IRQ 169
> saa7133[0]: found at 0000:04:00.0, rev: 240, irq: 169, latency: 32,
> mmio: 0xfd9ff000
> saa7133[0]: subsystem: 4e42:0306, board: UNKNOWN/GENERIC
> [card=0,autodetected]
> saa7133[0]: board init: gpio is 210000
> saa7133[0]: i2c eeprom 00: 42 4e 06 03 54 20 1c 00 43 43 a9 1c 55 d2 b2 92
> saa7133[0]: i2c eeprom 10: 00 ff a6 0f ff 20 ff ff ff ff ff ff ff ff ff ff
> saa7133[0]: i2c eeprom 20: 01 40 01 03 03 01 01 03 08 ff 01 07 ff ff ff ff
> saa7133[0]: i2c eeprom 30: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
> saa7133[0]: i2c eeprom 40: ff 1c 00 c0 ff 10 07 01 c2 96 01 16 32 15 ff ff
> saa7133[0]: i2c eeprom 50: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
> saa7133[0]: i2c eeprom 60: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
> saa7133[0]: i2c eeprom 70: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
> saa7133[0]: registered device video0 [v4l2]
> saa7133[0]: registered device vbi0
> bttv: driver version 0.9.16 loaded
> bttv: using 8 buffers with 2080k (520 pages) each for capture
> bttv: Bt8xx card found (0).
> ACPI: PCI Interrupt 0000:04:01.0[A] -> GSI 17 (level, low) -> IRQ 233
> bttv0: Bt878 (rev 17) at 0000:04:01.0, irq: 233, latency: 32, mmio:
> 0xfd8ff000
> bttv0: detected: Hauppauge WinTV [card=10], PCI subsystem ID is 0070:13eb
> bttv0: using: Hauppauge (bt878) [card=10,autodetected]
> bttv0: gpio: en=00000000, out=00000000 in=00ffffdb [init]
> bttv0: Hauppauge/Voodoo msp34xx: reset line init [5]
> input: i2c IR (Hauppauge) as /class/input/input2
> tveeprom 2-0050: Hauppauge model 61344, rev D421, serial# 3855351
> tveeprom 2-0050: tuner model is Philips FM1216 (idx 21, type 5)
> tveeprom 2-0050: TV standards PAL(B/G) (eeprom 0x04)
> tveeprom 2-0050: audio processor is MSP3415 (idx 6)
> tveeprom 2-0050: has radio
> bttv0: using tuner=5
> bttv0: i2c: checking for MSP34xx  (at)  0x80... found
> msp3400 2-0040: chip=MSP3415D-B3 +nicam +simple mode=simple
> msp3400 2-0040: msp3410 daemon started
> bttv0: i2c: checking for TDA9875  (at)  0xb0... not found
> bttv0: i2c: checking for TDA7432  (at)  0x8a... not found
> tvaudio 1-004b: pic16c54 (PV951) found  (at)  0x96 (saa7133[0])
> bttv0: i2c: checking for TDA9887  (at)  0x86... not found
> tuner 2-0061: chip found  (at)  0xc2 (bt878 #0 [sw])
> tuner 2-0061: type set to 5 (Philips PAL_BG (FI1216 and compatibles))
> bttv0: registered device video1
> bttv0: registered device vbi1
> bttv0: registered device radio0
> bttv0: PLL: 28636363 => 35468950 .. ok

--
video4linux-list mailing list
Unsubscribe mailto:video4linux-list-request (at) redhat.com?subject=unsubscribe
https://www.redhat.com/mailman/listinfo/video4linux-list