changing audio input on my saa7134 card

[Hartmut Hackmann <hartmut.hackmann (at) t-online.de>]

Hi,

grig wrote:
> Hello
> I own saa7134 card (Terratec Cinergy 600 TV MK3), and want to capture video/audio input signal using Composite video input and "audio in" of this card. 
> The problem is that when I capture TV signal using RF connector and TV input with tuner, I can get both video and audio signals, but when I try to capture signal using composite video input and "audio in", I can get only audio. As I understand, to capture also audio from capture card "audio in", there must be some way to change audio input source from TV tuner to "audio in". Is it possible with saa7134 driver (may be some additional patches are needed)?
> --
> video4linux-list mailing list
> Unsubscribe mailto:video4linux-list-request (at) redhat.com?subject=subscribe
> https://www.redhat.com/mailman/listinfo/video4linux-list

Do you have an analog audio cable from the tv to the sound card installed?
Does the radio work?
If it doesn't, the assignment of the line input aof the saa7134 might be wrong.
If you don't have the analog cable, are you aware that your recording source
is not the sound card?

Best regards
   Hartmut

--
video4linux-list mailing list
Unsubscribe mailto:video4linux-list-request (at) redhat.com?subject=unsubscribe
https://www.redhat.com/mailman/listinfo/video4linux-list