scantv does not work : open /dev/vbi(0) : invalid argument

["Pierre Mallard" <mallard.pierre (at) gmail.com>]

Hi

On Gentoo, linux-2.6.16-r1, xawtv 3.95-r, carte MiroPCTV RAVE
I'm trying to work with scantv, unfortunately, it does not work :

-- scantv -n SECAM -f france
[global]
freqtab = france

[defaults]
input = Television
norm = SECAM

vbi: open failed [/dev/vbi]
open /dev/vbi: Invalid argument

-- dmesg | grep bttv
bttv: driver version 0.9.16 loaded
bttv: using 8 buffers with 2080k (520 pages) each for capture
bttv: Bt8xx card found (0).
bttv0: Bt878 (rev 17) at 0000:02:09.0, irq: 225, latency: 64, mmio:
0xf7efe000
bttv0: detected: Pinnacle PCTV [bswap] [card=39], PCI subsystem ID is
bd11:1200
bttv0: using: Pinnacle PCTV Studio/Rave [card=39,autodetected]
bttv0: gpio: en=00000000, out=00000000 in=00ff27ff [init]
bttv0: i2c: checking for MSP34xx  (at)  0x80... not found
bttv0: miro: id=9 tuner=3 radio=no stereo=no
bttv0: using tuner=3
bttv0: i2c: checking for MSP34xx  (at)  0x80... not found
bttv0: i2c: checking for TDA9875  (at)  0xb0... not found
bttv0: i2c: checking for TDA7432  (at)  0x8a... not found
bttv0: i2c: checking for TDA9887  (at)  0x86... not found
bttv0: registered device video0
bttv0: registered device vbi0
bttv0: PLL: 28636363 => 35468950 .. ok

-- dmesg | grep tuner
tuner 1-0060: All bytes are equal. It is not a TEA5767
tuner 1-0060: chip found  (at)  0xc0 (bt878 #0 [sw])
tuner 1-0060: type set to 3 (Philips (SECAM+PAL_BG) (FI1216MF, FM1216MF,
FR1216MF))

I attached also strace -f output

Thx for any help

Attachment: strace_scantv
Description: Binary data

--
video4linux-list mailing list
Unsubscribe mailto:video4linux-list-request (at) redhat.com?subject=unsubscribe
https://www.redhat.com/mailman/listinfo/video4linux-list