VSTREAM terminator remote

["James R. Webb" <jrwebb (at) qwest.net>]

You need to configure the remote. Get the input package from 
www.bytesex.org/cvs-snapshots and install. Then try a site like 
http://www.linuxtv.org/v4lwiki/index.php/Remote_controllers .

Jim Webb
----- Original Message ----- 
From: "horacio" <orasio (at) adinet.com.uy>
To: "Linux and Kernel Video" <video4linux-list (at) redhat.com>
Sent: Thursday, April 27, 2006 5:01 PM
Subject: VSTREAM terminator remote


> Hello people,
> I have a VStream Studio Terminator card, and using the default 2.6.16 
> saa7134 module with the right parameters ( sudo modprobe saa7134 card=65 
> tuner=54 ir_debug=1 ) for the card, it does work ok, but the remote 
> doesn't.
>
> The thing is that every key sends the same event!
>
> This is an excerpt of /var/log/debug
>
>
> Apr 26 23:43:41 ruth kernel: saa7133[0]/ir: build_key gpio=0x0 mask=0x1f 
> data=0
> Apr 26 23:43:41 ruth kernel: saa7133[0]/ir: build_key gpio=0x40 mask=0x1f 
> data=0
> Apr 26 23:43:41 ruth kernel: saa7133[0]/ir: build_key gpio=0x0 mask=0x1f 
> data=0
> Apr 26 23:43:42 ruth kernel: saa7133[0]/ir: build_key gpio=0x40 mask=0x1f 
> data=0
>
> When I load evbug.ko, I get this:
>
> Apr 26 23:42:36 ruth kernel: evbug.c: Event. Dev: pci-0000:00:0a.0/ir0, 
> Type: 1, Code: 395, Value: 1
> Apr 26 23:42:36 ruth kernel: evbug.c: Event. Dev: pci-0000:00:0a.0/ir0, 
> Type: 0, Code: 0, Value: 0
> Apr 26 23:42:36 ruth kernel: evbug.c: Event. Dev: pci-0000:00:0a.0/ir0, 
> Type: 1, Code: 395, Value: 0
> Apr 26 23:42:36 ruth kernel: evbug.c: Event. Dev: pci-0000:00:0a.0/ir0, 
> Type: 0, Code: 0, Value: 0
> Apr 26 23:42:36 ruth kernel: evbug.c: Event. Dev: pci-0000:00:0a.0/ir0, 
> Type: 1, Code: 395, Value: 1
> Apr 26 23:42:36 ruth kernel: evbug.c: Event. Dev: pci-0000:00:0a.0/ir0, 
> Type: 0, Code: 0, Value: 0
> Apr 26 23:42:36 ruth kernel: evbug.c: Event. Dev: pci-0000:00:0a.0/ir0, 
> Type: 1, Code: 395, Value: 0
> Apr 26 23:42:36 ruth kernel: evbug.c: Event. Dev: pci-0000:00:0a.0/ir0, 
> Type: 0, Code: 0, Value: 0
>
>
>
> I read the v4l remotes wiki entry that says I should set the mask to 0 in 
> saa7134-input.c, I tries that, but the same thing happens, every button 
> produces the same pair of log entries.
> I am using the Linux kernel 2.6.16  downloaded from kernel.org, any ideas?
>
>
> Thanks, Horacio
> orasio (at) adinet.com.uy

--
video4linux-list mailing list
Unsubscribe mailto:video4linux-list-request (at) redhat.com?subject=unsubscribe
https://www.redhat.com/mailman/listinfo/video4linux-list