Wow!! It's great to see you using Video for Linux. It's the only one I've
been able to use both on Linux and Windows for the last few years.
I'd like to come see your setup and share some few linux based audio/video
distros that use.
Please let me know which room you are in and when would be a good time for
me to stop by.
thanks.
> Hi,
>
> Thank you for your response. I've linked the audio output of the card
> directly to an external amplifier (a Philips receiver) just to be sure
to
> circumvent any problems with the soundcard and its configuration. I'm
sure
> the output functions because of the white noise sound when not tuned to
a
> channel.
>
> Regards,
>
> Bernie
>
> Op woensdag 3 mei 2006 03:34, schreef Hua Fan:
>> Do you link the audio output of the PVR to the sound card?
>>
>> Or your sound card that you link to is configured correctly?(the "line
>> in"
>> or the "cd in" or other)
>>
>> 2006/5/1, Bernie <bernie-lists (at) xs4all.nl>:
>> >
>> > Hi everybody,
>> >
>> > Since I have Linux in use (for about one year) I've been able to
>> tackle
>> > every problem in couple of days except for this one.
>> > I have a Leadtek PVR2000 installed in my system (AMD x86_64, opensuse
>> 10
>> > with all updates available via Yast) and I'm able to tune to channels
>> and
>> > get a nice picture.
>> > However, despite all efforts and tips and tricks found on the
internet
>> I
>> > still am not able to get any sound from the card. I connected the
>> audio out
>> > of my TV card (two tulip connectors ) to my stereo amplifier so to
be
>> sure
>> > to circumvent any problems related to ALSA , soundcard etc.
>> >
>> > - When starting up the machine or reloading modules manually (cx8800,
>> > cx88xx, cx8802, cx88_blackbird, tda9887, tuner) I get a lot of noise
>> to my
>> > speaker telling me that the tuner has not (yet) tuned to a station.
>> loading
>> > tda9887 ends it.
>> > - scantv finds a lot of stations (norm = PAL-BG , channels = Western
>> > Europe).
>> > - When I start xawtv and choose a station, I get video (though I have
>> to
>> > adapt hue, saturation etc) but the audio goes totally silent. If I
>> switch
>> > between stations I get scratchy noises like needle on a vinyl plate.
>> I'm
>> > sure v4l is not muted or too low on volume (checked it using 'v4lctl
>> list')
>> > - kernel 2.6.13-15.8-default
>> >
>> > 'lspci -vv -s 00:0c'
>> > 00:0c.0 Multimedia video controller: Conexant CX23880/1/2/3 PCI Video
>> and
>> > Audio Decoder (rev 05)
>> > Subsystem: LeadTek Research Inc. Leadtek PVR 2000
>> > Control: I/O- Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop-
>> > ParErr- Stepping- SERR- FastB2B-
>> > Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium
>> >TAbort-
>> > <TAbort- <MAbort- >SERR- <PERR-
>> > Interrupt: pin A routed to IRQ 177
>> > Region 0: Memory at 00000000dd000000 (32-bit,
>> non-prefetchable)
>> > [size=16M]
>> > Capabilities: [44] Vital Product Data
>> > Capabilities: [4c] Power Management version 2
>> > Flags: PMEClk- DSI+ D1- D2- AuxCurrent=0mA
>> > PME(D0-,D1-,D2-,D3hot-,D3cold-)
>> > Status: D0 PME-Enable- DSel=0 DScale=0 PME-
>> >
>> > 00:0c.2 Multimedia controller: Conexant CX23880/1/2/3 PCI Video and
>> Audio
>> > Decoder [MPEG Port] (rev 05)
>> > Subsystem: LeadTek Research Inc. Leadtek PVR 2000
>> > Control: I/O- Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop-
>> > ParErr- Stepping- SERR- FastB2B-
>> > Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium
>> >TAbort-
>> > <TAbort- <MAbort- >SERR- <PERR-
>> > Interrupt: pin A routed to IRQ 177
>> > Region 0: Memory at 00000000de000000 (32-bit,
>> non-prefetchable)
>> > [size=16M]
>> > Capabilities: [4c] Power Management version 2
>> > Flags: PMEClk- DSI+ D1- D2- AuxCurrent=0mA
>> > PME(D0-,D1-,D2-,D3hot-,D3cold-)
>> > Status: D0 PME-Enable- DSel=0 DScale=0 PME-
>> >
>> >
>> >
>> > I fiddled with all kind of parameters, especially with tda9887 (pal,
>> qss,
>> > port1, port2) but with no result at all.
>> >
>> > Now I did the following:
>> > 1) modprobe cx88xx tuner=38 card=9 audio_debug=1 && modprobe cx8800
>> > 2) rmmod tda9887
>> > 3) modprobe tda9887 debug=2 <--- ends noise
>> >
>> > and then I start xawtv and zap between some stations.
>> >
>> > Please find below the kernel log output since loading 1)
>> >
>> > Apr 30 21:10:00 bernie kernel: cx2388x v4l2 driver version 0.0.5
>> loaded
>> > Apr 30 21:10:00 bernie kernel: ACPI: PCI Interrupt 0000:00:0c.0[A] ->
>> GSI
>> > 16 (level, low) -> IRQ 177
>> > Apr 30 21:10:00 bernie kernel: cx88[0]: subsystem: 107d:663c, board:
>> > Leadtek PVR 2000 [card=9,insmod option]
>> > Apr 30 21:10:00 bernie kernel: TV tuner 38 at 0x1fe, Radio tuner -1
at
>> > 0x1fe
>> > Apr 30 21:10:00 bernie kernel: i2c-algo-bit.o: (0) scl=1, sda=1
>> > Apr 30 21:10:00 bernie kernel: i2c-algo-bit.o: (1) scl=1, sda=0
>> > Apr 30 21:10:00 bernie kernel: i2c-algo-bit.o: (2) scl=1, sda=1
>> > Apr 30 21:10:00 bernie kernel: i2c-algo-bit.o: (3) scl=0, sda=1
>> > Apr 30 21:10:00 bernie kernel: i2c-algo-bit.o: (4) scl=1, sda=1
>> > Apr 30 21:10:00 bernie kernel: i2c-algo-bit.o: cx88[0] passed test.
>> > Apr 30 21:10:00 bernie kernel: cx88[0]/0: found at 0000:00:0c.0, rev:
>> 5,
>> > irq: 177, latency: 32, mmio: 0xdd000000
>> > Apr 30 21:10:00 bernie kernel: : chip found (at) 0xc0 (cx88[0])
>> > Apr 30 21:10:00 bernie kernel: : All bytes are equal. It is not a
>> TEA5767
>> > Apr 30 21:10:00 bernie kernel: tuner 0-0060: type set to 38 (Philips
>> > PAL/SECAM multi (FM1216ME MK3))
>> > Apr 30 21:10:00 bernie kernel: tda9885/6/7: chip found (at) 0x86
>> > Apr 30 21:10:00 bernie kernel: cx88[0]/0: registered device video0
>> [v4l2]
>> > Apr 30 21:10:00 bernie kernel: cx88[0]/0: registered device vbi0
>> > Apr 30 21:10:00 bernie kernel: cx88[0]/0: registered device radio0
>> > Apr 30 21:10:00 bernie kernel: cx88[0]/0: set_audio_standard_BTSC
>> (status:
>> > known-good)
>> > Apr 30 21:10:00 bernie kernel: cx88[0]/0: cx88: tvaudio thread
started
>> > Apr 30 21:10:01 bernie kernel: cx88[0]/0: AUD_STATUS: 0xfe72 [mono/no
>> > pilot] ctl=BTSC_AUTO_STEREO
>> > Apr 30 21:10:02 bernie kernel: cx88[0]/0: AUD_STATUS: 0xfe32 [mono/no
>> > pilot] ctl=BTSC_AUTO_STEREO
>> > Apr 30 21:10:03 bernie kernel: cx88[0]/0: AUD_STATUS: 0xfe72 [mono/no
>> > pilot] ctl=BTSC_AUTO_STEREO
>> > Apr 30 21:10:04 bernie kernel: cx88[0]/0: AUD_STATUS: 0xfdb2 [mono/no
>> > pilot] ctl=BTSC_AUTO_STEREO
>> > Apr 30 21:10:06 bernie kernel: cx88[0]/0: AUD_STATUS: 0xfeb2 [mono/no
>> > pilot] ctl=BTSC_AUTO_STEREO
>> > Apr 30 21:10:07 bernie kernel: cx88[0]/0: AUD_STATUS: 0xfe32 [mono/no
>> > pilot] ctl=BTSC_AUTO_STEREO
>> > Apr 30 21:10:08 bernie kernel: cx88[0]/0: AUD_STATUS: 0xfef2 [mono/no
>> > pilot] ctl=BTSC_AUTO_STEREO
>> > Apr 30 21:10:09 bernie kernel: cx88[0]/0: AUD_STATUS: 0xfe72 [mono/no
>> > pilot] ctl=BTSC_AUTO_STEREO
>> > Apr 30 21:10:11 bernie kernel: cx88[0]/0: AUD_STATUS: 0xfe32 [mono/no
>> > pilot] ctl=BTSC_AUTO_STEREO
>> > Apr 30 21:10:13 bernie kernel: tda9885/6/7: chip found (at) 0x86
>> > Apr 30 21:10:13 bernie kernel: tda9885/6/7: Oops: no tvnorm entry
>> found
>> > Apr 30 21:10:13 bernie kernel: tda9885/6/7: writing: b=0xc0 c=0x10
>> e=0x00
>> > Apr 30 21:10:13 bernie kernel: tda9885/6/7: write: byte B 0xc0
>> > Apr 30 21:10:13 bernie kernel: B0 video mode : sound trap
>> > Apr 30 21:10:13 bernie kernel: B1 auto mute fm : no
>> > Apr 30 21:10:13 bernie kernel: B2 carrier mode : Intercarrier
>> > Apr 30 21:10:13 bernie kernel: B3-4 tv sound/radio : AM/TV
>> > Apr 30 21:10:13 bernie kernel: B5 force mute audio: no
>> > Apr 30 21:10:13 bernie kernel: B6 output port 1 : high
>> (inactive)
>> > Apr 30 21:10:13 bernie kernel: B7 output port 2 : high
>> (inactive)
>> > Apr 30 21:10:13 bernie kernel: tda9885/6/7: write: byte C 0x10
>> > Apr 30 21:10:13 bernie kernel: C0-4 top adjustment : 0 dB
>> > Apr 30 21:10:13 bernie kernel: C5-6 de-emphasis : no
>> > Apr 30 21:10:13 bernie kernel: C7 audio gain : 0
>> > Apr 30 21:10:13 bernie kernel: tda9885/6/7: write: byte E 0x00
>> > Apr 30 21:10:13 bernie kernel: E0-1 sound carrier : 4.5 MHz
>> > Apr 30 21:10:13 bernie kernel: E6 l pll ganting : 13
>> > Apr 30 21:10:13 bernie kernel: E2-4 video if : 58.75 MHz
>> > Apr 30 21:10:13 bernie kernel: E5 tuner gain : normal
>> > Apr 30 21:10:13 bernie kernel: E7 vif agc output : pin3+pin22
>> port
>> > Apr 30 21:10:13 bernie kernel: --
>> > Apr 30 21:10:13 bernie kernel: cx88[0]/0: AUD_STATUS: 0xfe72 [mono/no
>> > pilot] ctl=BTSC_AUTO_STEREO
>> > Apr 30 21:10:14 bernie kernel: cx88[0]/0: AUD_STATUS: 0x72 [mono/no
>> pilot]
>> > ctl=BTSC_AUTO_STEREO
>> > Apr 30 21:10:15 bernie kernel: cx88[0]/0: AUD_STATUS: 0x1f2 [mono/no
>> > pilot] ctl=BTSC_AUTO_STEREO
>> > Apr 30 21:10:16 bernie kernel: cx88[0]/0: AUD_STATUS: 0x232 [mono/no
>> > pilot] ctl=BTSC_AUTO_STEREO
>> > Apr 30 21:10:17 bernie kernel: cx88[0]/0: AUD_STATUS: 0x1b2 [mono/no
>> > pilot] ctl=BTSC_AUTO_STEREO
>> > Apr 30 21:10:18 bernie kernel: cx88[0]/0: AUD_STATUS: 0x2b2 [mono/no
>> > pilot] ctl=BTSC_AUTO_STEREO
>> > Apr 30 21:10:19 bernie kernel: cx88[0]/0: AUD_STATUS: 0x332 [mono/no
>> > pilot] ctl=BTSC_AUTO_STEREO
>> > Apr 30 21:10:20 bernie kernel: cx88[0]/0: AUD_STATUS: 0x372 [mono/no
>> > pilot] ctl=BTSC_AUTO_STEREO
>> > Apr 30 21:10:21 bernie kernel: cx88[0]/0: AUD_STATUS: 0x2f2 [mono/no
>> > pilot] ctl=BTSC_AUTO_STEREO
>> > Apr 30 21:10:22 bernie kernel: cx88[0]/0: AUD_STATUS: 0x332 [mono/no
>> > pilot] ctl=BTSC_AUTO_STEREO
>> > Apr 30 21:10:23 bernie kernel: cx88[0]/0: AUD_STATUS: 0x232 [mono/no
>> > pilot] ctl=BTSC_AUTO_STEREO
>> > Apr 30 21:10:25 bernie kernel: cx88[0]/0: AUD_STATUS: 0x2b2 [mono/no
>> > pilot] ctl=BTSC_AUTO_STEREO
>> > Apr 30 21:10:26 bernie kernel: cx88[0]/0: AUD_STATUS: 0x232 [mono/no
>> > pilot] ctl=BTSC_AUTO_STEREO
>> > Apr 30 21:10:27 bernie kernel: cx88[0]/0: AUD_STATUS: 0x272 [mono/no
>> > pilot] ctl=BTSC_AUTO_STEREO
>> > Apr 30 21:10:28 bernie kernel: cx88[0]/0: AUD_STATUS: 0x1f2 [mono/no
>> > pilot] ctl=BTSC_AUTO_STEREO
>> > Apr 30 21:10:29 bernie kernel: cx88[0]/0: AUD_STATUS: 0x272 [mono/no
>> > pilot] ctl=BTSC_AUTO_STEREO
>> > Apr 30 21:10:30 bernie kernel: cx88[0]/0: AUD_STATUS: 0x1f2 [mono/no
>> > pilot] ctl=BTSC_AUTO_STEREO
>> > Apr 30 21:10:32 bernie kernel: cx88[0]/0: AUD_STATUS: 0x272 [mono/no
>> > pilot] ctl=BTSC_AUTO_STEREO
>> > Apr 30 21:10:32 bernie kernel: cx88[0]/0: set_audio_standard_A2
PAL-BG
>> A2
>> > (status: known-good)
>> > Apr 30 21:10:32 bernie kernel: tda9885/6/7: switching to v4l2
>> > Apr 30 21:10:32 bernie kernel: tda9885/6/7: configure for: PAL-BG
>> > Apr 30 21:10:32 bernie kernel: tda9885/6/7: writing: b=0xd4 c=0x70
>> e=0x09
>> > Apr 30 21:10:32 bernie kernel: tda9885/6/7: write: byte B 0xd4
>> > Apr 30 21:10:32 bernie kernel: B0 video mode : sound trap
>> > Apr 30 21:10:32 bernie kernel: B1 auto mute fm : no
>> > Apr 30 21:10:32 bernie kernel: B2 carrier mode : QSS
>> > Apr 30 21:10:32 bernie kernel: B3-4 tv sound/radio : FM/TV
>> > Apr 30 21:10:32 bernie kernel: B5 force mute audio: no
>> > Apr 30 21:10:32 bernie kernel: B6 output port 1 : high
>> (inactive)
>> > Apr 30 21:10:32 bernie kernel: B7 output port 2 : high
>> (inactive)
>> > Apr 30 21:10:32 bernie kernel: tda9885/6/7: write: byte C 0x70
>> > Apr 30 21:10:32 bernie kernel: C0-4 top adjustment : 0 dB
>> > Apr 30 21:10:32 bernie kernel: C5-6 de-emphasis : 50
>> > Apr 30 21:10:32 bernie kernel: C7 audio gain : 0
>> > Apr 30 21:10:32 bernie kernel: tda9885/6/7: write: byte E 0x09
>> > Apr 30 21:10:32 bernie kernel: E0-1 sound carrier : 5.5 MHz
>> > Apr 30 21:10:32 bernie kernel: E6 l pll ganting : 13
>> > Apr 30 21:10:32 bernie kernel: E2-4 video if : 38.9 MHz
>> > Apr 30 21:10:32 bernie kernel: E5 tuner gain : normal
>> > Apr 30 21:10:32 bernie kernel: E7 vif agc output : pin3+pin22
>> port
>> > Apr 30 21:10:32 bernie kernel: --
>> > Apr 30 21:10:32 bernie kernel: cx88[0]/0: set_audio_standard_A2
PAL-BG
>> A2
>> > (status: known-good)
>> > Apr 30 21:10:32 bernie kernel: cx88[0]/0: AUD_STATUS: 0x2a
[mono/pilot
>> c2]
>> > ctl=A2_AUTO_STEREO
>> > Apr 30 21:10:33 bernie kernel: cx88[0]/0: AUD_STATUS: 0xfffa
>> [mono/pilot
>> > c2] ctl=A2_AUTO_STEREO
>> > Apr 30 21:10:34 bernie kernel: cx88[0]/0: AUD_STATUS: 0xffe0
>> [stereo/no
>> > pilot] ctl=A2_AUTO_STEREO
>> > Apr 30 21:10:35 bernie kernel: cx88[0]/0: AUD_STATUS: 0xfffa
>> [mono/pilot
>> > c2] ctl=A2_AUTO_STEREO
>> > Apr 30 21:10:37 bernie kernel: cx88[0]/0: AUD_STATUS: 0xfff2 [mono/no
>> > pilot] ctl=A2_AUTO_STEREO
>> > Apr 30 21:10:38 bernie kernel: cx88[0]/0: AUD_STATUS: 0xfffa
>> [mono/pilot
>> > c2] ctl=A2_AUTO_STEREO
>> > Apr 30 21:10:40 bernie kernel: cx88[0]/0: set_audio_standard_A2
PAL-BG
>> A2
>> > (status: known-good)
>> > Apr 30 21:10:40 bernie kernel: cx88[0]/0: AUD_STATUS: 0xffe2 [mono/no
>> > pilot] ctl=A2_AUTO_STEREO
>> > Apr 30 21:10:41 bernie kernel: cx88[0]/0: AUD_STATUS: 0xfff2 [mono/no
>> > pilot] ctl=A2_AUTO_STEREO
>> > Apr 30 21:10:42 bernie kernel: cx88[0]/0: AUD_STATUS: 0x26
[mono/pilot
>> c1]
>> > ctl=A2_AUTO_STEREO
>> > Apr 30 21:10:42 bernie kernel: cx88[0]/0: cx88_set_stereo: mask
0x8bf,
>> ctl
>> > 0x8c [status=0x26,ctl=0xb00c,vol=0x0]
>> > Apr 30 21:10:43 bernie kernel: cx88[0]/0: AUD_STATUS: 0xfffa
>> [mono/pilot
>> > c2] ctl=A2_AUTO_STEREO
>> > Apr 30 21:10:43 bernie kernel: cx88[0]/0: cx88_set_stereo: mask 0x3f,
>> ctl
>> > 0x8 [status=0xfffa,ctl=0xb08c,vol=0x0]
>> > Apr 30 21:10:44 bernie kernel: cx88[0]/0: cx88_set_stereo: mask 0x3f,
>> ctl
>> > 0x8 [status=0xfffa,ctl=0xb088,vol=0x0]
>> > Apr 30 21:10:45 bernie kernel: cx88[0]/0: AUD_STATUS: 0xfff6
>> [mono/pilot
>> > c1] ctl=A2_FORCE_MONO1
>> > Apr 30 21:10:45 bernie kernel: cx88[0]/0: AUD_STATUS: 0x36
[mono/pilot
>> c1]
>> > ctl=A2_FORCE_MONO1
>> > Apr 30 21:10:46 bernie kernel: cx88[0]/0: AUD_STATUS: 0xfffa
>> [mono/pilot
>> > c2] ctl=A2_FORCE_MONO1
>> > Apr 30 21:10:46 bernie kernel: cx88[0]/0: AUD_STATUS: 0xfff2 [mono/no
>> > pilot] ctl=A2_FORCE_MONO1
>> > Apr 30 21:10:46 bernie kernel: cx88[0]/0: cx88_set_stereo: mask
0x8bf,
>> ctl
>> > 0x8c [status=0xfff2,ctl=0xb088,vol=0x0]
>> > Apr 30 21:10:47 bernie kernel: cx88[0]/0: AUD_STATUS: 0xfffa
>> [mono/pilot
>> > c2] ctl=A2_AUTO_STEREO
>> > Apr 30 21:10:48 bernie kernel: cx88[0]/0: AUD_STATUS: 0xfff2 [mono/no
>> > pilot] ctl=A2_AUTO_STEREO
>> > Apr 30 21:10:49 bernie kernel: cx88[0]/0: AUD_STATUS: 0xffe6
>> [mono/pilot
>> > c1] ctl=A2_AUTO_STEREO
>> > Apr 30 21:10:50 bernie kernel: cx88[0]/0: AUD_STATUS: 0xfffa
>> [mono/pilot
>> > c2] ctl=A2_AUTO_STEREO
>> > Apr 30 21:10:51 bernie kernel: cx88[0]/0: AUD_STATUS: 0xfff2 [mono/no
>> > pilot] ctl=A2_AUTO_STEREO
>> > Apr 30 21:10:53 bernie kernel: cx88[0]/0: AUD_STATUS: 0xffe6
>> [mono/pilot
>> > c1] ctl=A2_AUTO_STEREO
>> > Apr 30 21:10:54 bernie kernel: cx88[0]/0: AUD_STATUS: 0xfffa
>> [mono/pilot
>> > c2] ctl=A2_AUTO_STEREO
>> > Apr 30 21:10:56 bernie kernel: cx88[0]/0: AUD_STATUS: 0xfff2 [mono/no
>> > pilot] ctl=A2_AUTO_STEREO
>> > Apr 30 21:10:57 bernie kernel: cx88[0]/0: AUD_STATUS: 0xffe6
>> [mono/pilot
>> > c1] ctl=A2_AUTO_STEREO
>> > Apr 30 21:10:58 bernie kernel: cx88[0]/0: AUD_STATUS: 0x3a
[mono/pilot
>> c2]
>> > ctl=A2_AUTO_STEREO
>> > Apr 30 21:10:59 bernie kernel: cx88[0]/0: AUD_STATUS: 0xfff2 [mono/no
>> > pilot] ctl=A2_AUTO_STEREO
>> > Apr 30 21:11:00 bernie kernel: cx88[0]/0: AUD_STATUS: 0x34
>> [stereo/pilot
>> > c1] ctl=A2_AUTO_STEREO
>> > Apr 30 21:11:01 bernie kernel: cx88[0]/0: AUD_STATUS: 0xfffa
>> [mono/pilot
>> > c2] ctl=A2_AUTO_STEREO
>> > Apr 30 21:11:02 bernie kernel: cx88[0]/0: AUD_STATUS: 0x32 [mono/no
>> pilot]
>> > ctl=A2_AUTO_STEREO
>> > Apr 30 21:11:03 bernie kernel: cx88[0]/0: AUD_STATUS: 0x3a
[mono/pilot
>> c2]
>> > ctl=A2_AUTO_STEREO
>> > Apr 30 21:11:04 bernie kernel: cx88[0]/0: AUD_STATUS: 0xfff2 [mono/no
>> > pilot] ctl=A2_AUTO_STEREO
>> > Apr 30 21:11:05 bernie kernel: cx88[0]/0: AUD_STATUS: 0x3a
[mono/pilot
>> c2]
>> > ctl=A2_AUTO_STEREO
>> > Apr 30 21:11:06 bernie kernel: cx88[0]/0: AUD_STATUS: 0xfff2 [mono/no
>> > pilot] ctl=A2_AUTO_STEREO
>> > Apr 30 21:11:07 bernie kernel: cx88[0]/0: AUD_STATUS: 0xffe6
>> [mono/pilot
>> > c1] ctl=A2_AUTO_STEREO
>> > Apr 30 21:11:08 bernie kernel: cx88[0]/0: AUD_STATUS: 0xfff2 [mono/no
>> > pilot] ctl=A2_AUTO_STEREO
>> > Apr 30 21:11:09 bernie kernel: cx88[0]/0: AUD_STATUS: 0xffe6
>> [mono/pilot
>> > c1] ctl=A2_AUTO_STEREO
>> > Apr 30 21:11:10 bernie kernel: cx88[0]/0: AUD_STATUS: 0xfff2 [mono/no
>> > pilot] ctl=A2_AUTO_STEREO
>> > Apr 30 21:11:11 bernie kernel: cx88[0]/0: cx88: tvaudio thread
exiting
>> > Apr 30 21:11:11 bernie kernel: ACPI: PCI interrupt for device
>> 0000:00:0c.0disabled
>> >
>> > Also, with radio, I can tune into a station and the sound goes
silent.
>> > When not tuned in (eg start radio in the shell, tune to station and
>> increase
>> > the frequency half a megahertz), I hear the noise again.
>> >
>> > Who can help me out solving this really annoying problem or should I
>> have
>> > to conclude that there might be a hardware defect ? (I can't try on a
>> > windows machine because I don't have MS).
>> > Please let me know if any other information might help solve it.
>> >
>> > Regards,
>> >
>> > Bernie
>> >
>> > --
>> > video4linux-list mailing list
>> > Unsubscribe
>> mailto:video4linux-list-request (at) redhat.com?subject=unsubscribe
>> > https://www.redhat.com/mailman/listinfo/video4linux-list
>> >
>>
>>
>>
>> --
>> Be yourself.
>> --
>> video4linux-list mailing list
>> Unsubscribe
>> mailto:video4linux-list-request (at) redhat.com
?subjecthttps://www.redhat.com/mailman/listinfo/video4linux-list
>>
>>
>>
>
> --
> video4linux-list mailing list
> Unsubscribe mailto:video4linux-list-request (at) redhat.com
?subject=unsubscribe
> https://www.redhat.com/mailman/listinfo/video4linux-list
>
--
video4linux-list mailing list
Unsubscribe mailto:video4linux-list-request (at) redhat.com?subject=unsubscribe
https://www.redhat.com/mailman/listinfo/video4linux-list