Opensuse 10 - Leadtek PVR2000 - unable to get audio working
- From: Bernie <bernie-lists (at) xs4all.nl>
- Date: Thu, 4 May 2006 19:28:52 +0200
Hi,
I tried these parameters port1=x port2=y (and also qss=z) with all combinations for x and y and z being either 0 or 1. No change in behaviour however . .. .
Regards,
Bernie
Op donderdag 4 mei 2006 17:46, schreef Hua Fan:
> modprobe tda9887 port1=0 port2=0
>
> Get a try ;-)
>
> 2006/5/4, Kenneth Wyrick <kmw (at) caltek.net>:
> >
> > Wow!! It's great to see you using Video for Linux. It's the only one I've
> > been able to use both on Linux and Windows for the last few years.
> >
> > I'd like to come see your setup and share some few linux based audio/video
> > distros that use.
> >
> > Please let me know which room you are in and when would be a good time for
> > me to stop by.
> >
> > thanks.
> >
> > > Hi,
> > >
> > > Thank you for your response. I've linked the audio output of the card
> > > directly to an external amplifier (a Philips receiver) just to be sure
> > to
> > > circumvent any problems with the soundcard and its configuration. I'm
> > sure
> > > the output functions because of the white noise sound when not tuned to
> > a
> > > channel.
> > >
> > > Regards,
> > >
> > > Bernie
> > >
> > > Op woensdag 3 mei 2006 03:34, schreef Hua Fan:
> > >> Do you link the audio output of the PVR to the sound card?
> > >>
> > >> Or your sound card that you link to is configured correctly?(the "line
> > >> in"
> > >> or the "cd in" or other)
> > >>
> > >> 2006/5/1, Bernie <bernie-lists (at) xs4all.nl>:
> > >> >
> > >> > Hi everybody,
> > >> >
> > >> > Since I have Linux in use (for about one year) I've been able to
> > >> tackle
> > >> > every problem in couple of days except for this one.
> > >> > I have a Leadtek PVR2000 installed in my system (AMD x86_64, opensuse
> > >> 10
> > >> > with all updates available via Yast) and I'm able to tune to channels
> > >> and
> > >> > get a nice picture.
> > >> > However, despite all efforts and tips and tricks found on the
> > internet
> > >> I
> > >> > still am not able to get any sound from the card. I connected the
> > >> audio out
> > >> > of my TV card (two tulip connectors ) to my stereo amplifier so to
> > be
> > >> sure
> > >> > to circumvent any problems related to ALSA , soundcard etc.
> > >> >
> > >> > - When starting up the machine or reloading modules manually (cx8800,
> > >> > cx88xx, cx8802, cx88_blackbird, tda9887, tuner) I get a lot of noise
> > >> to my
> > >> > speaker telling me that the tuner has not (yet) tuned to a station.
> > >> loading
> > >> > tda9887 ends it.
> > >> > - scantv finds a lot of stations (norm = PAL-BG , channels = Western
> > >> > Europe).
> > >> > - When I start xawtv and choose a station, I get video (though I have
> > >> to
> > >> > adapt hue, saturation etc) but the audio goes totally silent. If I
> > >> switch
> > >> > between stations I get scratchy noises like needle on a vinyl plate.
> > >> I'm
> > >> > sure v4l is not muted or too low on volume (checked it using 'v4lctl
> > >> list')
> > >> > - kernel 2.6.13-15.8-default
> > >> >
> > >> > 'lspci -vv -s 00:0c'
> > >> > 00:0c.0 Multimedia video controller: Conexant CX23880/1/2/3 PCI Video
> > >> and
> > >> > Audio Decoder (rev 05)
> > >> > Subsystem: LeadTek Research Inc. Leadtek PVR 2000
> > >> > Control: I/O- Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop-
> > >> > ParErr- Stepping- SERR- FastB2B-
> > >> > Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium
> > >> >TAbort-
> > >> > <TAbort- <MAbort- >SERR- <PERR-
> > >> > Interrupt: pin A routed to IRQ 177
> > >> > Region 0: Memory at 00000000dd000000 (32-bit,
> > >> non-prefetchable)
> > >> > [size=16M]
> > >> > Capabilities: [44] Vital Product Data
> > >> > Capabilities: [4c] Power Management version 2
> > >> > Flags: PMEClk- DSI+ D1- D2- AuxCurrent=0mA
> > >> > PME(D0-,D1-,D2-,D3hot-,D3cold-)
> > >> > Status: D0 PME-Enable- DSel=0 DScale=0 PME-
> > >> >
> > >> > 00:0c.2 Multimedia controller: Conexant CX23880/1/2/3 PCI Video and
> > >> Audio
> > >> > Decoder [MPEG Port] (rev 05)
> > >> > Subsystem: LeadTek Research Inc. Leadtek PVR 2000
> > >> > Control: I/O- Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop-
> > >> > ParErr- Stepping- SERR- FastB2B-
> > >> > Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium
> > >> >TAbort-
> > >> > <TAbort- <MAbort- >SERR- <PERR-
> > >> > Interrupt: pin A routed to IRQ 177
> > >> > Region 0: Memory at 00000000de000000 (32-bit,
> > >> non-prefetchable)
> > >> > [size=16M]
> > >> > Capabilities: [4c] Power Management version 2
> > >> > Flags: PMEClk- DSI+ D1- D2- AuxCurrent=0mA
> > >> > PME(D0-,D1-,D2-,D3hot-,D3cold-)
> > >> > Status: D0 PME-Enable- DSel=0 DScale=0 PME-
> > >> >
> > >> >
> > >> >
> > >> > I fiddled with all kind of parameters, especially with tda9887 (pal,
> > >> qss,
> > >> > port1, port2) but with no result at all.
> > >> >
> > >> > Now I did the following:
> > >> > 1) modprobe cx88xx tuner=38 card=9 audio_debug=1 && modprobe cx8800
> > >> > 2) rmmod tda9887
> > >> > 3) modprobe tda9887 debug=2 <--- ends noise
> > >> >
> > >> > and then I start xawtv and zap between some stations.
> > >> >
> > >> > Please find below the kernel log output since loading 1)
> > >> >
> > >> > Apr 30 21:10:00 bernie kernel: cx2388x v4l2 driver version 0.0.5
> > >> loaded
> > >> > Apr 30 21:10:00 bernie kernel: ACPI: PCI Interrupt 0000:00:0c.0[A] ->
> > >> GSI
> > >> > 16 (level, low) -> IRQ 177
> > >> > Apr 30 21:10:00 bernie kernel: cx88[0]: subsystem: 107d:663c, board:
> > >> > Leadtek PVR 2000 [card=9,insmod option]
> > >> > Apr 30 21:10:00 bernie kernel: TV tuner 38 at 0x1fe, Radio tuner -1
> > at
> > >> > 0x1fe
> > >> > Apr 30 21:10:00 bernie kernel: i2c-algo-bit.o: (0) scl=1, sda=1
> > >> > Apr 30 21:10:00 bernie kernel: i2c-algo-bit.o: (1) scl=1, sda=0
> > >> > Apr 30 21:10:00 bernie kernel: i2c-algo-bit.o: (2) scl=1, sda=1
> > >> > Apr 30 21:10:00 bernie kernel: i2c-algo-bit.o: (3) scl=0, sda=1
> > >> > Apr 30 21:10:00 bernie kernel: i2c-algo-bit.o: (4) scl=1, sda=1
> > >> > Apr 30 21:10:00 bernie kernel: i2c-algo-bit.o: cx88[0] passed test.
> > >> > Apr 30 21:10:00 bernie kernel: cx88[0]/0: found at 0000:00:0c.0, rev:
> > >> 5,
> > >> > irq: 177, latency: 32, mmio: 0xdd000000
> > >> > Apr 30 21:10:00 bernie kernel: : chip found (at) 0xc0 (cx88[0])
> > >> > Apr 30 21:10:00 bernie kernel: : All bytes are equal. It is not a
> > >> TEA5767
> > >> > Apr 30 21:10:00 bernie kernel: tuner 0-0060: type set to 38 (Philips
> > >> > PAL/SECAM multi (FM1216ME MK3))
> > >> > Apr 30 21:10:00 bernie kernel: tda9885/6/7: chip found (at) 0x86
> > >> > Apr 30 21:10:00 bernie kernel: cx88[0]/0: registered device video0
> > >> [v4l2]
> > >> > Apr 30 21:10:00 bernie kernel: cx88[0]/0: registered device vbi0
> > >> > Apr 30 21:10:00 bernie kernel: cx88[0]/0: registered device radio0
> > >> > Apr 30 21:10:00 bernie kernel: cx88[0]/0: set_audio_standard_BTSC
> > >> (status:
> > >> > known-good)
> > >> > Apr 30 21:10:00 bernie kernel: cx88[0]/0: cx88: tvaudio thread
> > started
> > >> > Apr 30 21:10:01 bernie kernel: cx88[0]/0: AUD_STATUS: 0xfe72 [mono/no
> > >> > pilot] ctl=BTSC_AUTO_STEREO
> > >> > Apr 30 21:10:02 bernie kernel: cx88[0]/0: AUD_STATUS: 0xfe32 [mono/no
> > >> > pilot] ctl=BTSC_AUTO_STEREO
> > >> > Apr 30 21:10:03 bernie kernel: cx88[0]/0: AUD_STATUS: 0xfe72 [mono/no
> > >> > pilot] ctl=BTSC_AUTO_STEREO
> > >> > Apr 30 21:10:04 bernie kernel: cx88[0]/0: AUD_STATUS: 0xfdb2 [mono/no
> > >> > pilot] ctl=BTSC_AUTO_STEREO
> > >> > Apr 30 21:10:06 bernie kernel: cx88[0]/0: AUD_STATUS: 0xfeb2 [mono/no
> > >> > pilot] ctl=BTSC_AUTO_STEREO
> > >> > Apr 30 21:10:07 bernie kernel: cx88[0]/0: AUD_STATUS: 0xfe32 [mono/no
> > >> > pilot] ctl=BTSC_AUTO_STEREO
> > >> > Apr 30 21:10:08 bernie kernel: cx88[0]/0: AUD_STATUS: 0xfef2 [mono/no
> > >> > pilot] ctl=BTSC_AUTO_STEREO
> > >> > Apr 30 21:10:09 bernie kernel: cx88[0]/0: AUD_STATUS: 0xfe72 [mono/no
> > >> > pilot] ctl=BTSC_AUTO_STEREO
> > >> > Apr 30 21:10:11 bernie kernel: cx88[0]/0: AUD_STATUS: 0xfe32 [mono/no
> > >> > pilot] ctl=BTSC_AUTO_STEREO
> > >> > Apr 30 21:10:13 bernie kernel: tda9885/6/7: chip found (at) 0x86
> > >> > Apr 30 21:10:13 bernie kernel: tda9885/6/7: Oops: no tvnorm entry
> > >> found
> > >> > Apr 30 21:10:13 bernie kernel: tda9885/6/7: writing: b=0xc0 c=0x10
> > >> e=0x00
> > >> > Apr 30 21:10:13 bernie kernel: tda9885/6/7: write: byte B 0xc0
> > >> > Apr 30 21:10:13 bernie kernel: B0 video mode : sound trap
> > >> > Apr 30 21:10:13 bernie kernel: B1 auto mute fm : no
> > >> > Apr 30 21:10:13 bernie kernel: B2 carrier mode : Intercarrier
> > >> > Apr 30 21:10:13 bernie kernel: B3-4 tv sound/radio : AM/TV
> > >> > Apr 30 21:10:13 bernie kernel: B5 force mute audio: no
> > >> > Apr 30 21:10:13 bernie kernel: B6 output port 1 : high
> > >> (inactive)
> > >> > Apr 30 21:10:13 bernie kernel: B7 output port 2 : high
> > >> (inactive)
> > >> > Apr 30 21:10:13 bernie kernel: tda9885/6/7: write: byte C 0x10
> > >> > Apr 30 21:10:13 bernie kernel: C0-4 top adjustment : 0 dB
> > >> > Apr 30 21:10:13 bernie kernel: C5-6 de-emphasis : no
> > >> > Apr 30 21:10:13 bernie kernel: C7 audio gain : 0
> > >> > Apr 30 21:10:13 bernie kernel: tda9885/6/7: write: byte E 0x00
> > >> > Apr 30 21:10:13 bernie kernel: E0-1 sound carrier : 4.5 MHz
> > >> > Apr 30 21:10:13 bernie kernel: E6 l pll ganting : 13
> > >> > Apr 30 21:10:13 bernie kernel: E2-4 video if : 58.75 MHz
> > >> > Apr 30 21:10:13 bernie kernel: E5 tuner gain : normal
> > >> > Apr 30 21:10:13 bernie kernel: E7 vif agc output : pin3+pin22
> > >> port
> > >> > Apr 30 21:10:13 bernie kernel: --
> > >> > Apr 30 21:10:13 bernie kernel: cx88[0]/0: AUD_STATUS: 0xfe72 [mono/no
> > >> > pilot] ctl=BTSC_AUTO_STEREO
> > >> > Apr 30 21:10:14 bernie kernel: cx88[0]/0: AUD_STATUS: 0x72 [mono/no
> > >> pilot]
> > >> > ctl=BTSC_AUTO_STEREO
> > >> > Apr 30 21:10:15 bernie kernel: cx88[0]/0: AUD_STATUS: 0x1f2 [mono/no
> > >> > pilot] ctl=BTSC_AUTO_STEREO
> > >> > Apr 30 21:10:16 bernie kernel: cx88[0]/0: AUD_STATUS: 0x232 [mono/no
> > >> > pilot] ctl=BTSC_AUTO_STEREO
> > >> > Apr 30 21:10:17 bernie kernel: cx88[0]/0: AUD_STATUS: 0x1b2 [mono/no
> > >> > pilot] ctl=BTSC_AUTO_STEREO
> > >> > Apr 30 21:10:18 bernie kernel: cx88[0]/0: AUD_STATUS: 0x2b2 [mono/no
> > >> > pilot] ctl=BTSC_AUTO_STEREO
> > >> > Apr 30 21:10:19 bernie kernel: cx88[0]/0: AUD_STATUS: 0x332 [mono/no
> > >> > pilot] ctl=BTSC_AUTO_STEREO
> > >> > Apr 30 21:10:20 bernie kernel: cx88[0]/0: AUD_STATUS: 0x372 [mono/no
> > >> > pilot] ctl=BTSC_AUTO_STEREO
> > >> > Apr 30 21:10:21 bernie kernel: cx88[0]/0: AUD_STATUS: 0x2f2 [mono/no
> > >> > pilot] ctl=BTSC_AUTO_STEREO
> > >> > Apr 30 21:10:22 bernie kernel: cx88[0]/0: AUD_STATUS: 0x332 [mono/no
> > >> > pilot] ctl=BTSC_AUTO_STEREO
> > >> > Apr 30 21:10:23 bernie kernel: cx88[0]/0: AUD_STATUS: 0x232 [mono/no
> > >> > pilot] ctl=BTSC_AUTO_STEREO
> > >> > Apr 30 21:10:25 bernie kernel: cx88[0]/0: AUD_STATUS: 0x2b2 [mono/no
> > >> > pilot] ctl=BTSC_AUTO_STEREO
> > >> > Apr 30 21:10:26 bernie kernel: cx88[0]/0: AUD_STATUS: 0x232 [mono/no
> > >> > pilot] ctl=BTSC_AUTO_STEREO
> > >> > Apr 30 21:10:27 bernie kernel: cx88[0]/0: AUD_STATUS: 0x272 [mono/no
> > >> > pilot] ctl=BTSC_AUTO_STEREO
> > >> > Apr 30 21:10:28 bernie kernel: cx88[0]/0: AUD_STATUS: 0x1f2 [mono/no
> > >> > pilot] ctl=BTSC_AUTO_STEREO
> > >> > Apr 30 21:10:29 bernie kernel: cx88[0]/0: AUD_STATUS: 0x272 [mono/no
> > >> > pilot] ctl=BTSC_AUTO_STEREO
> > >> > Apr 30 21:10:30 bernie kernel: cx88[0]/0: AUD_STATUS: 0x1f2 [mono/no
> > >> > pilot] ctl=BTSC_AUTO_STEREO
> > >> > Apr 30 21:10:32 bernie kernel: cx88[0]/0: AUD_STATUS: 0x272 [mono/no
> > >> > pilot] ctl=BTSC_AUTO_STEREO
> > >> > Apr 30 21:10:32 bernie kernel: cx88[0]/0: set_audio_standard_A2
> > PAL-BG
> > >> A2
> > >> > (status: known-good)
> > >> > Apr 30 21:10:32 bernie kernel: tda9885/6/7: switching to v4l2
> > >> > Apr 30 21:10:32 bernie kernel: tda9885/6/7: configure for: PAL-BG
> > >> > Apr 30 21:10:32 bernie kernel: tda9885/6/7: writing: b=0xd4 c=0x70
> > >> e=0x09
> > >> > Apr 30 21:10:32 bernie kernel: tda9885/6/7: write: byte B 0xd4
> > >> > Apr 30 21:10:32 bernie kernel: B0 video mode : sound trap
> > >> > Apr 30 21:10:32 bernie kernel: B1 auto mute fm : no
> > >> > Apr 30 21:10:32 bernie kernel: B2 carrier mode : QSS
> > >> > Apr 30 21:10:32 bernie kernel: B3-4 tv sound/radio : FM/TV
> > >> > Apr 30 21:10:32 bernie kernel: B5 force mute audio: no
> > >> > Apr 30 21:10:32 bernie kernel: B6 output port 1 : high
> > >> (inactive)
> > >> > Apr 30 21:10:32 bernie kernel: B7 output port 2 : high
> > >> (inactive)
> > >> > Apr 30 21:10:32 bernie kernel: tda9885/6/7: write: byte C 0x70
> > >> > Apr 30 21:10:32 bernie kernel: C0-4 top adjustment : 0 dB
> > >> > Apr 30 21:10:32 bernie kernel: C5-6 de-emphasis : 50
> > >> > Apr 30 21:10:32 bernie kernel: C7 audio gain : 0
> > >> > Apr 30 21:10:32 bernie kernel: tda9885/6/7: write: byte E 0x09
> > >> > Apr 30 21:10:32 bernie kernel: E0-1 sound carrier : 5.5 MHz
> > >> > Apr 30 21:10:32 bernie kernel: E6 l pll ganting : 13
> > >> > Apr 30 21:10:32 bernie kernel: E2-4 video if : 38.9 MHz
> > >> > Apr 30 21:10:32 bernie kernel: E5 tuner gain : normal
> > >> > Apr 30 21:10:32 bernie kernel: E7 vif agc output : pin3+pin22
> > >> port
> > >> > Apr 30 21:10:32 bernie kernel: --
> > >> > Apr 30 21:10:32 bernie kernel: cx88[0]/0: set_audio_standard_A2
> > PAL-BG
> > >> A2
> > >> > (status: known-good)
> > >> > Apr 30 21:10:32 bernie kernel: cx88[0]/0: AUD_STATUS: 0x2a
> > [mono/pilot
> > >> c2]
> > >> > ctl=A2_AUTO_STEREO
> > >> > Apr 30 21:10:33 bernie kernel: cx88[0]/0: AUD_STATUS: 0xfffa
> > >> [mono/pilot
> > >> > c2] ctl=A2_AUTO_STEREO
> > >> > Apr 30 21:10:34 bernie kernel: cx88[0]/0: AUD_STATUS: 0xffe0
> > >> [stereo/no
> > >> > pilot] ctl=A2_AUTO_STEREO
> > >> > Apr 30 21:10:35 bernie kernel: cx88[0]/0: AUD_STATUS: 0xfffa
> > >> [mono/pilot
> > >> > c2] ctl=A2_AUTO_STEREO
> > >> > Apr 30 21:10:37 bernie kernel: cx88[0]/0: AUD_STATUS: 0xfff2 [mono/no
> > >> > pilot] ctl=A2_AUTO_STEREO
> > >> > Apr 30 21:10:38 bernie kernel: cx88[0]/0: AUD_STATUS: 0xfffa
> > >> [mono/pilot
> > >> > c2] ctl=A2_AUTO_STEREO
> > >> > Apr 30 21:10:40 bernie kernel: cx88[0]/0: set_audio_standard_A2
> > PAL-BG
> > >> A2
> > >> > (status: known-good)
> > >> > Apr 30 21:10:40 bernie kernel: cx88[0]/0: AUD_STATUS: 0xffe2 [mono/no
> > >> > pilot] ctl=A2_AUTO_STEREO
> > >> > Apr 30 21:10:41 bernie kernel: cx88[0]/0: AUD_STATUS: 0xfff2 [mono/no
> > >> > pilot] ctl=A2_AUTO_STEREO
> > >> > Apr 30 21:10:42 bernie kernel: cx88[0]/0: AUD_STATUS: 0x26
> > [mono/pilot
> > >> c1]
> > >> > ctl=A2_AUTO_STEREO
> > >> > Apr 30 21:10:42 bernie kernel: cx88[0]/0: cx88_set_stereo: mask
> > 0x8bf,
> > >> ctl
> > >> > 0x8c [status=0x26,ctl=0xb00c,vol=0x0]
> > >> > Apr 30 21:10:43 bernie kernel: cx88[0]/0: AUD_STATUS: 0xfffa
> > >> [mono/pilot
> > >> > c2] ctl=A2_AUTO_STEREO
> > >> > Apr 30 21:10:43 bernie kernel: cx88[0]/0: cx88_set_stereo: mask 0x3f,
> > >> ctl
> > >> > 0x8 [status=0xfffa,ctl=0xb08c,vol=0x0]
> > >> > Apr 30 21:10:44 bernie kernel: cx88[0]/0: cx88_set_stereo: mask 0x3f,
> > >> ctl
> > >> > 0x8 [status=0xfffa,ctl=0xb088,vol=0x0]
> > >> > Apr 30 21:10:45 bernie kernel: cx88[0]/0: AUD_STATUS: 0xfff6
> > >> [mono/pilot
> > >> > c1] ctl=A2_FORCE_MONO1
> > >> > Apr 30 21:10:45 bernie kernel: cx88[0]/0: AUD_STATUS: 0x36
> > [mono/pilot
> > >> c1]
> > >> > ctl=A2_FORCE_MONO1
> > >> > Apr 30 21:10:46 bernie kernel: cx88[0]/0: AUD_STATUS: 0xfffa
> > >> [mono/pilot
> > >> > c2] ctl=A2_FORCE_MONO1
> > >> > Apr 30 21:10:46 bernie kernel: cx88[0]/0: AUD_STATUS: 0xfff2 [mono/no
> > >> > pilot] ctl=A2_FORCE_MONO1
> > >> > Apr 30 21:10:46 bernie kernel: cx88[0]/0: cx88_set_stereo: mask
> > 0x8bf,
> > >> ctl
> > >> > 0x8c [status=0xfff2,ctl=0xb088,vol=0x0]
> > >> > Apr 30 21:10:47 bernie kernel: cx88[0]/0: AUD_STATUS: 0xfffa
> > >> [mono/pilot
> > >> > c2] ctl=A2_AUTO_STEREO
> > >> > Apr 30 21:10:48 bernie kernel: cx88[0]/0: AUD_STATUS: 0xfff2 [mono/no
> > >> > pilot] ctl=A2_AUTO_STEREO
> > >> > Apr 30 21:10:49 bernie kernel: cx88[0]/0: AUD_STATUS: 0xffe6
> > >> [mono/pilot
> > >> > c1] ctl=A2_AUTO_STEREO
> > >> > Apr 30 21:10:50 bernie kernel: cx88[0]/0: AUD_STATUS: 0xfffa
> > >> [mono/pilot
> > >> > c2] ctl=A2_AUTO_STEREO
> > >> > Apr 30 21:10:51 bernie kernel: cx88[0]/0: AUD_STATUS: 0xfff2 [mono/no
> > >> > pilot] ctl=A2_AUTO_STEREO
> > >> > Apr 30 21:10:53 bernie kernel: cx88[0]/0: AUD_STATUS: 0xffe6
> > >> [mono/pilot
> > >> > c1] ctl=A2_AUTO_STEREO
> > >> > Apr 30 21:10:54 bernie kernel: cx88[0]/0: AUD_STATUS: 0xfffa
> > >> [mono/pilot
> > >> > c2] ctl=A2_AUTO_STEREO
> > >> > Apr 30 21:10:56 bernie kernel: cx88[0]/0: AUD_STATUS: 0xfff2 [mono/no
> > >> > pilot] ctl=A2_AUTO_STEREO
> > >> > Apr 30 21:10:57 bernie kernel: cx88[0]/0: AUD_STATUS: 0xffe6
> > >> [mono/pilot
> > >> > c1] ctl=A2_AUTO_STEREO
> > >> > Apr 30 21:10:58 bernie kernel: cx88[0]/0: AUD_STATUS: 0x3a
> > [mono/pilot
> > >> c2]
> > >> > ctl=A2_AUTO_STEREO
> > >> > Apr 30 21:10:59 bernie kernel: cx88[0]/0: AUD_STATUS: 0xfff2 [mono/no
> > >> > pilot] ctl=A2_AUTO_STEREO
> > >> > Apr 30 21:11:00 bernie kernel: cx88[0]/0: AUD_STATUS: 0x34
> > >> [stereo/pilot
> > >> > c1] ctl=A2_AUTO_STEREO
> > >> > Apr 30 21:11:01 bernie kernel: cx88[0]/0: AUD_STATUS: 0xfffa
> > >> [mono/pilot
> > >> > c2] ctl=A2_AUTO_STEREO
> > >> > Apr 30 21:11:02 bernie kernel: cx88[0]/0: AUD_STATUS: 0x32 [mono/no
> > >> pilot]
> > >> > ctl=A2_AUTO_STEREO
> > >> > Apr 30 21:11:03 bernie kernel: cx88[0]/0: AUD_STATUS: 0x3a
> > [mono/pilot
> > >> c2]
> > >> > ctl=A2_AUTO_STEREO
> > >> > Apr 30 21:11:04 bernie kernel: cx88[0]/0: AUD_STATUS: 0xfff2 [mono/no
> > >> > pilot] ctl=A2_AUTO_STEREO
> > >> > Apr 30 21:11:05 bernie kernel: cx88[0]/0: AUD_STATUS: 0x3a
> > [mono/pilot
> > >> c2]
> > >> > ctl=A2_AUTO_STEREO
> > >> > Apr 30 21:11:06 bernie kernel: cx88[0]/0: AUD_STATUS: 0xfff2 [mono/no
> > >> > pilot] ctl=A2_AUTO_STEREO
> > >> > Apr 30 21:11:07 bernie kernel: cx88[0]/0: AUD_STATUS: 0xffe6
> > >> [mono/pilot
> > >> > c1] ctl=A2_AUTO_STEREO
> > >> > Apr 30 21:11:08 bernie kernel: cx88[0]/0: AUD_STATUS: 0xfff2 [mono/no
> > >> > pilot] ctl=A2_AUTO_STEREO
> > >> > Apr 30 21:11:09 bernie kernel: cx88[0]/0: AUD_STATUS: 0xffe6
> > >> [mono/pilot
> > >> > c1] ctl=A2_AUTO_STEREO
> > >> > Apr 30 21:11:10 bernie kernel: cx88[0]/0: AUD_STATUS: 0xfff2 [mono/no
> > >> > pilot] ctl=A2_AUTO_STEREO
> > >> > Apr 30 21:11:11 bernie kernel: cx88[0]/0: cx88: tvaudio thread
> > exiting
> > >> > Apr 30 21:11:11 bernie kernel: ACPI: PCI interrupt for device
> > >> 0000:00:0c.0disabled
> > >> >
> > >> > Also, with radio, I can tune into a station and the sound goes
> > silent.
> > >> > When not tuned in (eg start radio in the shell, tune to station and
> > >> increase
> > >> > the frequency half a megahertz), I hear the noise again.
> > >> >
> > >> > Who can help me out solving this really annoying problem or should I
> > >> have
> > >> > to conclude that there might be a hardware defect ? (I can't try on a
> > >> > windows machine because I don't have MS).
> > >> > Please let me know if any other information might help solve it.
> > >> >
> > >> > Regards,
> > >> >
> > >> > Bernie
> > >> >
> > >> > --
> > >> > video4linux-list mailing list
> > >> > Unsubscribe
> > >> mailto:video4linux-list-request (at) redhat.com?subject=unsubscribe
> > >> > https://www.redhat.com/mailman/listinfo/video4linux-list
> > >> >
> > >>
> > >>
> > >>
> > >> --
> > >> Be yourself.
> > >> --
> > >> video4linux-list mailing list
> > >> Unsubscribe
> > >> mailto:video4linux-list-request (at) redhat.com
> > ?subjecthttps://www.redhat.com/mailman/listinfo/video4linux-list
> > >>
> > >>
> > >>
> > >
> > > --
> > > video4linux-list mailing list
> > > Unsubscribe mailto:video4linux-list-request (at) redhat.com
> > ?subject=unsubscribe
> > > https://www.redhat.com/mailman/listinfo/video4linux-list
> > >
> >
> > --
> > video4linux-list mailing list
> > Unsubscribe mailto:video4linux-list-request (at) redhat.com?subject=unsubscribe
> > https://www.redhat.com/mailman/listinfo/video4linux-list
> >
>
>
>
> --
> Be yourself.
> --
> video4linux-list mailing list
> Unsubscribe mailto:video4linux-list-request (at) redhat.com?subjecthttps://www.redhat.com/mailman/listinfo/video4linux-list
>
>
>
--
video4linux-list mailing list
Unsubscribe mailto:video4linux-list-request (at) redhat.com?subject=unsubscribe
https://www.redhat.com/mailman/listinfo/video4linux-list