Leadtek Winfast 2000 XP Expert - remote problems from 2.6.13+ kernel

[Nedim Hadzihasanovic <nedim.h (at) bih.net.ba>]

Hi everybody,

I have a bit of a problem with my remote since kernel 2.6.13. Well, it works 
but I have to press a button 5 or 6 times and only then the computer 
responds. On kernel 2.6.12.6 the remote works perfectly, but everything above 
that kernel results in this odd behaviour.

Card I have is Leadtek Winfast 2000 XP Expert:

cx2388x v4l2 driver version 0.0.5 loaded
ACPI: PCI Interrupt 0000:01:09.0[A] -> Link [LNK2] -> GSI 9 (level, low) -> 
IRQ 9
CORE cx88[0]: subsystem: 107d:6611, board: Leadtek Winfast 2000XP Expert 
[card=5,autodetected]
TV tuner 44 at 0x1fe, Radio tuner -1 at 0x1fe
tuner 0-0060: All bytes are equal. It is not a TEA5767
tuner 0-0060: chip found  (at)  0xc0 (cx88[0])
tuner 0-0060: type set to 44 (Philips 4 in 1 (ATI TV Wonder Pro/Conexant))
tda9887 0-0043: chip found  (at)  0x86 (cx88[0])
cx88[0]: Leadtek Winfast 2000XP Expert config: tuner=38, eeprom[0]=0x01
cx88[0] IR: irq gpio=0xf5e338 code=7 | poll up
input: cx88 IR (Leadtek Winfast 2000XP as /class/input/input9
cx88[0]/0: found at 0000:01:09.0, rev: 5, irq: 9, latency: 32, mmio: 
0xe2000000
cx88[0]/0: registered device video0 [v4l2]
cx88[0]/0: registered device vbi0
cx88[0]/0: registered device radio0

When I try ir_debug parm for cx88xx module I get following results:
For example I pressed buttons 1,2,3 on remote:
#dmesg -c
cx88[0] IR: irq gpio=0xf5e328 code=5 | poll up
cx88[0] IR: irq gpio=0xf5e330 code=6 | poll up
cx88[0] IR: irq gpio=0xf5e238 code=7 | poll
cx88[0] IR: irq gpio=0xf5e338 code=7 | poll up

BUT ONLY NUMBER 3 SHOWS ON SCREEN, and only difference I can see is this thing 
poll/poll up. Any help appreciated.

--
video4linux-list mailing list
Unsubscribe mailto:video4linux-list-request (at) redhat.com?subject=unsubscribe
https://www.redhat.com/mailman/listinfo/video4linux-list