Leadtek Winfast 2000 XP Expert - remote problems from 2.6.13+ kernel

[Arek Jankowski <arekjan (at) yahoo.com>]

I can confirm the problem. The same thing is happening to me with this card. 
In 2.6.12 it worked great, in 2.6.16 the remote is "not very responsive" at 
all. Usually you have to press the same button a few times to get something 
out of it, although sometimes it registers on the first press but that's very 
rare.
I would also appreciate any help!
Arek


On Thursday 04 May 2006 20:50, Nedim Hadzihasanovic wrote:
> Hi everybody,
>
> I have a bit of a problem with my remote since kernel 2.6.13. Well, it
> works but I have to press a button 5 or 6 times and only then the computer
> responds. On kernel 2.6.12.6 the remote works perfectly, but everything
> above that kernel results in this odd behaviour.
>
> Card I have is Leadtek Winfast 2000 XP Expert:
>
> cx2388x v4l2 driver version 0.0.5 loaded
> ACPI: PCI Interrupt 0000:01:09.0[A] -> Link [LNK2] -> GSI 9 (level, low) ->
> IRQ 9
> CORE cx88[0]: subsystem: 107d:6611, board: Leadtek Winfast 2000XP Expert
> [card=5,autodetected]
> TV tuner 44 at 0x1fe, Radio tuner -1 at 0x1fe
> tuner 0-0060: All bytes are equal. It is not a TEA5767
> tuner 0-0060: chip found  (at)  0xc0 (cx88[0])
> tuner 0-0060: type set to 44 (Philips 4 in 1 (ATI TV Wonder Pro/Conexant))
> tda9887 0-0043: chip found  (at)  0x86 (cx88[0])
> cx88[0]: Leadtek Winfast 2000XP Expert config: tuner=38, eeprom[0]=0x01
> cx88[0] IR: irq gpio=0xf5e338 code=7 | poll up
> input: cx88 IR (Leadtek Winfast 2000XP as /class/input/input9
> cx88[0]/0: found at 0000:01:09.0, rev: 5, irq: 9, latency: 32, mmio:
> 0xe2000000
> cx88[0]/0: registered device video0 [v4l2]
> cx88[0]/0: registered device vbi0
> cx88[0]/0: registered device radio0
>
> When I try ir_debug parm for cx88xx module I get following results:
> For example I pressed buttons 1,2,3 on remote:
> #dmesg -c
> cx88[0] IR: irq gpio=0xf5e328 code=5 | poll up
> cx88[0] IR: irq gpio=0xf5e330 code=6 | poll up
> cx88[0] IR: irq gpio=0xf5e238 code=7 | poll
> cx88[0] IR: irq gpio=0xf5e338 code=7 | poll up
>
> BUT ONLY NUMBER 3 SHOWS ON SCREEN, and only difference I can see is this
> thing poll/poll up. Any help appreciated.
>
> --
> video4linux-list mailing list
> Unsubscribe mailto:video4linux-list-request (at) redhat.com?subject=unsubscribe
> https://www.redhat.com/mailman/listinfo/video4linux-list

--
video4linux-list mailing list
Unsubscribe mailto:video4linux-list-request (at) redhat.com?subject=unsubscribe
https://www.redhat.com/mailman/listinfo/video4linux-list