video4linux-list Digest, Vol 27, Issue 18

["Daniel Stolz" <dan.stolz (at) future-skies.com>]

I am trying to look at the composite video of an AverTV CardBus card.

Linux must ;) recognize it because I can see black-and-white video
through the Svideo input.  However, I can't see video from the composite
source or the coax input.

I'm using tvtime to look at it.  Is there another application that would
be better for determining what exactly the card can see?

Here is the relevant dmesg output

saa7133[0]: found at 0000:0d:00.0, rev: 17, irq: 10, latency: 0, mmio:
0xf4000000
PCI: Setting latency timer of device 0000:0d:00.0 to 64
saa7133[0]: subsystem: 1461:03e2, board: UNKNOWN/GENERIC
[card=0,autodetected]
saa7133[0]: board init: gpio is 0
saa7133[0]: i2c eeprom 00: 61 14 e2 03 ff ff ff ff ff ff ff ff ff ff ff
ff
saa7133[0]: i2c eeprom 10: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
ff
saa7133[0]: i2c eeprom 20: ff d1 fb ff ff ff ff ff ff ff ff ff ff ff ff
ff
saa7133[0]: i2c eeprom 30: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
ff
saa7133[0]: i2c eeprom 40: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
ff
saa7133[0]: i2c eeprom 50: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
ff
saa7133[0]: i2c eeprom 60: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
ff
saa7133[0]: i2c eeprom 70: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
ff
saa7133[0]: registered device video0 [v4l2]
saa7133[0]: registered device vbi0

--
video4linux-list mailing list
Unsubscribe mailto:video4linux-list-request (at) redhat.com?subject=unsubscribe
https://www.redhat.com/mailman/listinfo/video4linux-list