Tuning issue with DViCO FusionHDTV DVB-T Plus (ZL10353)

["Rob Browne" <roblinux (at) gmail.com>]

On 7/15/06, Aaron Sedgmen <six_stitcher (at) yahoo.com.au> wrote:
> Rob Browne wrote:
> > Hi,
> > Have the same card, using 2.6.17-rc1. In Melbourne, ABC, 7 and 10 are
> ok.
> > Nine cannot get FE lock, SBS the lock fluctuates.
> >
> > Previously using bttv DVB card, and all channels were ok.
>
> I have since discovered via another forum that the current Linux driver
> for
> the ZL10353 chip does not support channels operating on an offset
> frequency,
> as is the case with the station I am having the problem with.  The driver
> author does not yet have sufficient documentation from the chip
> manufacturer
> to be able to implement support for offset frequencies.
>
> http://forums.whirlpool.net.au/forum-replies.cfm?t=521910 contains the
> relevant thread.




Hi Aaron,

I am sure this is the problem with the zl10353. In Melbourne only Nine and
SBS
use freq offsets, both use +0.125. These are the only channels causing the
timeout
problem.

Is there a way to attach the mt352 instead of the zl10353 ?


Cheers Rob.
--
video4linux-list mailing list
Unsubscribe mailto:video4linux-list-request (at) redhat.com?subject=unsubscribe
https://www.redhat.com/mailman/listinfo/video4linux-list