ASUSTeK Tiger LNA Hybrid Capture Device - signal unstable.
- From: hermann pitton <hermann-pitton (at) arcor.de>
- Date: Sat, 03 Mar 2007 22:08:35 +0100
Am Samstag, den 03.03.2007, 00:00 +0100 schrieb Ra.M.:
> hermann pitton ha scritto:
> > Am Freitag, den 02.03.2007, 02:03 +0100 schrieb Ra.M.:
> >
> >> Hartmut Hackmann wrote:
> >>
> >>
> >>> Hi,
> >>>
> >>> Ra.M. schrieb:
> >>>
> >>>> Hi.
> >>>>
> >>>> This thread:
> >>>>
> >>>> http://www.linuxtv.org/pipermail/linux-dvb/2007-February/
> >>>>
> > 015705.html
> >
> >>>> has helped me to (partially) solve my problems with a
> >>>>
> > DVB-T card (PCI)
> >
> >>>> ASUSTeK Tiger LNA Hybrid Capture Device
> >>>> with Jayhawk tuner.
> >>>>
> >>>> /sbin/lspci -v
> >>>>
> >>>> 03:0a.0 Multimedia controller: Philips Semiconductors
> >>>>
> > SAA7133/SAA7135
> >
> >>>> Video Broadcast Decoder (rev d1)
> >>>> Subsystem: ASUSTeK Computer Inc. Unknown device
> >>>>
> > 4871
> >
> >>>> Flags: bus master, medium devsel, latency 32, IRQ
> >>>>
> > 23
> >
> >>>> Memory at fdefe000 (32-bit, non-prefetchable)
> >>>>
> > [size=2K]
> >
> >>>> This is the procedure that I have followed:
> >>>>
> >>>> 1) I have downloaded, compiled and installed, latest
> >>>>
> > Mercurial
> >
> >>>> v4l-dvb-6a48ec9e0f65.tar.bz2
> >>>>
> >>>> 2) I have downloaded the firmware dvb-fe-tda10046.fw
> >>>>
> > (from LifeView) and
> >
> >>>> put it in /lib/firmware.
> >>>>
> >>>> 3) I have created a file /etc/modprobe.d/dvb.conf with
> >>>>
> > these lines:
> >
> >>>> alias char-major-81 videodev
> >>>> alias char-major-81-0 saa7134
> >>>> options saa7134 card=78 tuner 67
> >>>>
> > i2c_scan=1
> >
> >>>> gpio_tracking=1 alsa=1
> >>>>
> >>>> alias char-major-89 i2c-dev
> >>>>
> >>>> (for me card=78 works better than card=109)
> >>>>
> >>>> 4) I have added to /etc/rc.d/rc.modules these lines:
> >>>>
> >>>> /sbin/modprobe saa7134-alsa
> >>>> /sbin/modprobe saa7134-dvb
> >>>>
> >>>> At boot time I get (from dmesg):
> >>>>
> >>>> saa7133[0]: found at 0000:03:0a.0, rev: 209, irq: 23,
> >>>>
> > latency: 32, mmio:
> >
> >>>> 0xfdefe000
> >>>> saa7133[0]: subsystem: 1043:4871, board: ASUSTeK P7131
> >>>>
> > Dual
> >
> >>>> [card=78,insmod option]
> >>>> saa7133[0]: board init: gpio is 0
> >>>> saa7133[0]: gpio: mode=0x0000000 in=0x0000000
> >>>>
> > out=0x0000000 [pre-init]
> >
> >>>> input: saa7134 IR (ASUSTeK P7131 Dual) as
> >>>>
> > /class/input/input5
> >
> >>>> saa7133[0]: i2c eeprom 00: 43 10 71 48 54 20 1c 00 43 43
> >>>>
> > a9 1c 55 d2 b2 92
> >
> >>>> saa7133[0]: i2c eeprom 10: ff ff ff 0f ff 20 ff ff ff ff
> >>>>
> > ff ff ff ff ff ff
> >
> >>>> saa7133[0]: i2c eeprom 20: 01 40 01 02 03 00 01 03 08 ff
> >>>>
> > 00 cf ff ff ff ff
> >
> >>>> saa7133[0]: i2c eeprom 30: ff ff ff ff ff ff ff ff ff ff
> >>>>
> > ff ff ff ff ff ff
> >
> >>>> saa7133[0]: i2c eeprom 40: ff 21 00 c2 96 10 03 22 15 50
> >>>>
> > ff ff ff ff ff ff
> >
> >>>> saa7133[0]: i2c eeprom 50: ff ff ff ff ff ff ff ff ff ff
> >>>>
> > ff ff ff ff ff ff
> >
> >>>> saa7133[0]: i2c eeprom 60: ff ff ff ff ff ff ff ff ff ff
> >>>>
> > ff ff ff ff ff ff
> >
> >>>> saa7133[0]: i2c eeprom 70: ff ff ff ff ff ff ff ff ff ff
> >>>>
> > ff ff ff ff ff ff
> >
> >>>> saa7133[0]: i2c scan: found device (at) 0x10 [???]
> >>>> saa7133[0]: i2c scan: found device (at) 0x96 [???]
> >>>> saa7133[0]: i2c scan: found device (at) 0xa0 [eeprom]
> >>>> saa7133[0]: gpio: mode=0x0200000 in=0x0000000
> >>>>
> > out=0x0000000 [Television]
> >
> >>>> saa7133[0]: gpio: mode=0x0200000 in=0x0000000
> >>>>
> > out=0x0000000 [Television]
> >
> >>>> tuner 2-004b: chip found (at) 0x96 (saa7133[0])
> >>>> tuner 2-004b: type set to 67 (Philips TD1316 Hybrid
> >>>>
> > Tuner)
> >
> >>>> tuner 2-004b: type set to 67 (Philips TD1316 Hybrid
> >>>>
> > Tuner)
> >
> >>>> saa7133[0]: registered device video0 [v4l2]
> >>>> saa7133[0]: registered device vbi0
> >>>> saa7133[0]: registered device radio0
> >>>> saa7133[0]: gpio: mode=0x0200000 in=0x0000000
> >>>>
> > out=0x0000000 [Television]
> >
> >>>> DVB: registering new adapter (saa7133[0]).
> >>>> DVB: registering frontend 0 (Philips TDA10046H DVB-T)...
> >>>> tda1004x: setting up plls for 48MHz sampling clock
> >>>> tda1004x: timeout waiting for DSP ready
> >>>> tda1004x: found firmware revision 0 -- invalid
> >>>> tda1004x: trying to boot from eeprom
> >>>> tda1004x: timeout waiting for DSP ready
> >>>> tda1004x: found firmware revision 0 -- invalid
> >>>> tda1004x: waiting for firmware upload...
> >>>> tda1004x: found firmware revision 29 -- ok
> >>>> saa7134 ALSA driver for DMA sound loaded
> >>>> saa7133[0]/alsa: saa7133[0] at 0xfdefe000 irq 23
> >>>>
> > registered as card -1
> >
> >>>> All works but when I try to view something with kaffeine
> >>>>
> > or xine, the
> >
> >>>> signal appears
> >>>> unstable; this is a snapshot from xine:
> >>>>
> >>>> http://xoomer.alice.it/ramsoft/shots/snapshot1.jpg
> >>>>
> >>>> Under Windows XP (software CyberLink Power Cinema) the
> >>>>
> > signal is very
> >
> >>>> stable.
> >>>>
> >>>> Another problem is that under Linux I cannot tune VHF
> >>>>
> > channels; there is
> >
> >>>> a MUX at
> >>>> 226.5 MHz but, neither kaffeine, nor scan, can find it.
> >>>>
> >>>> What is wrong in my procedure?
> >>>>
> >>>> Thanks.
> >>>>
> >>>> --
> >>>> video4linux-list mailing list
> >>>> Unsubscribe mailto:video4linux-list-request redhat
> >>>>
> > com?subject=unsubscribe
> >
> >>>> https://www.redhat.com/mailman/listinfo/video4linux-list
> >>>>
> >>>>
> >>> Sorry, not much time today.
> >>> Please get the repository from today (bug fixed) and try
> >>>
> > card=109. AFIK, your
> >
> >>> card is very similar.
> >>> Regarding the missing mux: The channel decoder is qiute picky
> >>>
> > with the parameters
> >
> >>> please check whether FEC and GI are right (some other drivers
> >>>
> > just ignore these).
> >
> >>> If this works better, can you please report?
> >>>
> >>> Good luck
> >>> Hartmut
> >>>
> >> I have tried your suggestions. No improvements.
> >>
> >> However, it seems that this mothel of DVB-T card has a very poor
> >>
> > quality!
> >
> >
> > Hi,
> >
> > it is likely only some switching issue.
> >
> > The card is dirt cheap compared to what one payed 1 1/2 years back for
> > the P7131 Dual and only misses radio and the remote.
> >
> > Emmanuel in your above link got DVB-T working after using analog TV
> > first with card=109 and for sure not tuner=67, but the default 54.
> > You tried this too just with card=109 ?
> >
> > If no success, it seems he was using tuner_config=3.
> > http://www.linuxtv.org/pipermail/linux-dvb/2007-February/015755.html
> > We must get at a point where we have something reproducable.
> >
> > The missing mux can also be caused by 7MHz bandwidth instead of 8.
> >
> I'm using tuner_config=2 and bandwidth is 8 MHz for all muxes.
>
> With card=78 or card=109 I get the same results (the card works but the
> signal is
> unstable); tuner=58 for me does not work (or works very badly).
Hi,
you won't get analog to work with a wrong tuner. It is tuner=54 for that
and nothing else.
The gpio 22 is involved in the LNA switching and tuner_config=2 should
be right, but according to the recent .inf file and the Asus driver
release notes, they had several changes and extensions to get it right.
(As suspected the 1043:4876 seems to have a LNA already too)
There was also the suggestion to try with TDA10046_GP00_I
static struct tda1004x_config philips_tiger_s_config = {
.demod_address = 0x08,
.invert = 1,
.invert_oclk = 0,
.xtal_freq = TDA10046_XTAL_16M,
.agc_config = TDA10046_AGC_TDA827X,
.gpio_config = TDA10046_GP01_I,
.if_freq = TDA10046_FREQ_045,
.i2c_gate = 0x4b,
.tuner_address = 0x61,
.tuner_config = 2,
.antenna_switch= 1,
.request_firmware = philips_tda1004x_request_firmware
};
in saa7134-dvb.c.
The 1043:4871 seems to be OEM only, also gpio27 is mentioned for some s-
video/cvbs analog switching.
Cheers,
Hermann
;*****************************************************************************
;
; SAA713x Based - BDA TV Capture Driver
; Supports: 32 bit
;
;*****************************************************************************
[Version]
signature = "$CHICAGO$" ;All Windows OS
Class = MEDIA
ClassGUID = {4d36e96c-e325-11ce-bfc1-08002be10318}
Provider = %PROVIDER%
CatalogFile.NTx86 = 3xHybrid.cat
;---------------------mm/dd/yyyy,version--------------------
DriverVer=01/26/2007,13.3.5.3
; -> Release
;-----------------------------------------------------------
[Manufacturer]
%PROVIDER% = SupportedBoards, NTx86
;---> 32 BIT SUPPORT <---
[SupportedBoards.NTx86]
;******** Generic ID's, used for testing purposes only !!! ***
;%ASUSTek_33.DeviceDesc% = ASUSTek_33.NTx86,PCI\VEN_1131&DEV_7133
;******** Mercur, Tiger,... ***
%ASUSTV7134.DeviceDesc% = ASUSTek_33.NTx86,PCI\VEN_1131&DEV_7134&SUBSYS_48421043
%ASUSTV7133.DeviceDesc% = ASUSTek_33.NTx86,PCI\VEN_1131&DEV_7133&SUBSYS_48431043
%ASUSTV7135.DeviceDesc% = ASUSTek_33.NTx86,PCI\VEN_1131&DEV_7133&SUBSYS_48451043
%ASUSTiger.DeviceDesc% = ASUSTek_33.NTx86,PCI\VEN_1131&DEV_7133&SUBSYS_48621043
%ASUSTigerS.DeviceDesc% = ASUSTek_33.NTx86,PCI\VEN_1131&DEV_7133&SUBSYS_48761043
%ASUSTigerS3in1.DeviceDesc% = ASUSTek_33.NTx86,PCI\VEN_1131&DEV_7133&SUBSYS_48781043
%NECCAPTiger.DeviceDesc% = ASUSTek_33.NTx86,PCI\VEN_1131&DEV_7133&SUBSYS_48571043
[SourceDisksNames]
1 = %INSTALLATION_DISK%,,
[SourceDisksFiles.x86]
3xHybrid.sys = 1
34CoInstaller.dll = 1
Ph3xIB32MV.dll = 1
[DestinationDirs]
SectionX32.CopyDll.NTx86 = 11
SectionX32.CopyDriver.NTx86 = 10,system32\drivers
[SectionX32.CopyDll.NTx86]
34CoInstaller.dll
Ph3xIB32MV.dll
[SectionX32.CopyDriver.NTx86]
3xHybrid.sys
;======================================
;
; Initialization Entries
;
;======================================
;******** SAA7133 x32 ***
[ASUSTek_33.NTx86.CoInstallers]
CopyFiles = SectionX32.CopyDll.NTx86
AddReg = SectionX32.DllAddReg.NTx86
[ASUSTek_33.NTx86]
Include = ks.inf, wdmaudio.inf, kscaptur.inf, bda.inf
Needs = KS.Registration, WDMAUDIO.Registration.NT, KSCAPTUR.Registration.NT, BDA.Installation.NT
CopyFiles = SectionX32.CopyDriver.NTx86, SectionX32.CopyDll.NTx86
AddReg = SectionX32.AddReg.NTx86, ASUSTek_33.AddReg
RegisterDlls = Ph3xIB32MV.Register
[ASUSTek_33.NTx86.Services]
AddService = %SERVICE_NAME_X32%, 0x00000002, SectionX32.ServiceInstall.NTx86
;******** GENERAL x32 ***
[SectionX32.ServiceInstall.NTx86]
DisplayName = %DISPLAY_NAME%
Description = %SERVICE_DESCRIPTION%
ServiceType = %SERVICE_KERNEL_DRIVER%
StartType = %SERVICE_DEMAND_START%
ErrorControl = %SERVICE_ERROR_IGNORE%
ServiceBinary = %12%\3xHybrid.sys
;======================================
;
; Registry Entries
;
;======================================
; [StartName=driver-object-name]
; [AddReg=add-registry-section[, add-registry-section] ...]
; [DelReg=del-registry-section[, del-registry-section] ...]
; [BitReg=bit-registry-section[,bit-registry-section] ...]
; [LoadOrderGroup=load-order-group-name]
; [Dependencies=depend-on-item-name[,depend-on-item-name]...]
;
;******** General DLL Registry Entries ***
;
[SectionX32.DllAddReg.NTx86]
HKR,,CoInstallers32,0x00010000,"34CoInstaller.dll, CoInstallerEntry"
;
;******** General Driver Registry Entries ***
;
[SectionX32.AddReg.NTx86]
HKR,,DevLoader,,*NTKERN
HKR,,NTMPDriver,,3xHybrid.sys
; --- Registry Entries For Audio Capture ---
HKR,,Driver,,3xHybrid.sys
HKR,,AssociatedFilters,,"wdmaud,swmidi,redbook"
HKR,Drivers,SubClasses,,"wave,mixer"
HKR,Drivers\wave\wdmaud.drv,Driver,,wdmaud.drv
HKR,Drivers\mixer\wdmaud.drv,Driver,,wdmaud.drv
HKR,Drivers\wave\wdmaud.drv,Description,,"ASUSTek Audio Capture Device"
HKR,Drivers\mixer\wdmaud.drv,Description,,"ASUSTek Audio Capture Device"
; add audio input and output pinnames
HKLM,SYSTEM\CurrentControlSet\Control\MediaCategories\%AVSTREAM_ANLG_AUDIO_IN_PIN%,"Name",,"Analog Audioinput"
HKLM,SYSTEM\CurrentControlSet\Control\MediaCategories\%AVSTREAM_ANLG_AUDIO_OUT_PIN%,"Name",,"Audio"
HKLM,SYSTEM\CurrentControlSet\Control\MediaCategories\%AVSTREAM_ANLG_VIDEO_ITU_PIN%,"Name",,"Analog ITU Video"
HKLM,SYSTEM\CurrentControlSet\Control\MediaCategories\%AVSTREAM_ANLG_AUDIO_I2S_PIN%,"Name",,"I2S Audio"
HKLM,SYSTEM\CurrentControlSet\Control\MediaCategories\%AVSTREAM_ANLG_AUDIO_CAP_PIN%,"Name",,"~Audio"
HKLM,SYSTEM\CurrentControlSet\Control\MediaCategories\%AVSTREAM_ANLG_VIDEO_CAP_PIN%,"Name",,"~Capture"
HKLM,SYSTEM\CurrentControlSet\Control\MediaCategories\%AVSTREAM_ANLG_VIDEO_PRE_PIN%,"Name",,"~Preview"
HKLM,SYSTEM\CurrentControlSet\Control\MediaCategories\%AVSTREAM_MPEG_AES_PIN%,"Name",,"MPEG Audio ES"
HKLM,SYSTEM\CurrentControlSet\Control\MediaCategories\%AVSTREAM_MPEG_VES_PIN%,"Name",,"MPEG Video ES"
HKLM,SYSTEM\CurrentControlSet\Control\MediaCategories\%AVSTREAM_MPEG_PS_PIN%,"Name",, "MPEG2 Program"
;
;******** Board - Specific Registry Entries ***
;
;---- SAA7133 ----
[ASUSTek_33.AddReg]
HKR, "Parameters","Prefix",,%ASUSTek_CUSTOM_TUNERNAME%
; audio capture registry entries
HKR,,AssociatedFilters,,"wdmaud,swmidi,redbook"
HKR,,Driver,,3xHybrid.SYS
HKR,Drivers,SubClasses,,"wave,mixer"
HKR,Drivers\wave\wdmaud.drv,Driver,,wdmaud.drv
HKR,Drivers\mixer\wdmaud.drv,Driver,,wdmaud.drv
HKR,Drivers\wave\wdmaud.drv,Description,,"ASUSTek audio capture device"
HKR,Drivers\mixer\wdmaud.drv,Description,,"ASUSTek audio capture device"
HKR, "Audio", "FM Radio IF",0x00010001,0x729555
HKR, "Audio", "Pll_Xtal32_ACNI_32KHz", 0x00010001, 0x187D96
HKR, "Parameters", "IgnoreBW",0x00010001,0x00
HKR, "Parameters", "IgnoreDVBParameter",0x00010001,0x01
HKR, "Parameters", "AsusSwitchIgnoreDVBT",0x00010001,0x0
HKR, "Parameters", "TDA8275A_BlankVideo",0x00010001,0x01
HKR, "Parameters", "AsusSwitch", 0x00010001, 0
HKR, "Parameters", "SmallXBar",0x00010001,0x01
HKR, "Parameters", "CapPreviewEnabled",0x00010001,0
HKR, "Parameters", "ImproveNCS",0x00010001,0x01
HKR, "Parameters", "IfMacrovision",0x00010001,0
HKR, "Parameters", "IfDisableAudioFilter",0x00010001,0x01
HKR, "Parameters", "TDA8275A_LNA_LVL_TV",0x00010001,0x01
HKR, "Parameters", "TDA8275A_LNA_Monitor_LVLo",0x00010001,22
HKR, "Parameters", "TDA8275A_LNA_Monitor_LVHi",0x00010001,45
HKR, "Parameters", "TDA8275A_LNA_Monitor_TO",0x00010001,1
HKR, "Parameters", "TDA8275A_LNA_Monitor_Enable",0x00010001,1
HKR, "Parameters", "TDA8275A_LNA_Monitor_Sens",0x00010001,1
HKR, "Parameters", "TDA8275A_LNA_Monitor_Auto",0x00010001,0
HKR, "Parameters", "IfStandardDetectSwitch",0x00010001,1
HKR, "Parameters", "TDA8275A_UseTuningThread",0x00010001,1
[Ph3xIB32MV.Register]
11,,Ph3xIB32MV.dll,1 ;FLG_REGSVR_DLLREGISTER
;======================================
;
; Strings Defines
;
;======================================
[Strings]
;-------------------------------
; Capture Filter Pin Name GUIDs
;-------------------------------
AVSTREAM_ANLG_AUDIO_IN_PIN = "{7BB284B9-714D-493d-A101-B1B028E782BD}"
AVSTREAM_ANLG_AUDIO_OUT_PIN = "{5582E657-E596-42b5-9DB3-541B27A2355F}"
AVSTREAM_ANLG_VIDEO_ITU_PIN = "{82631A2E-403C-4581-A4B0-EC173D004410}"
AVSTREAM_ANLG_AUDIO_I2S_PIN = "{C2E46358-F032-4d88-B802-06B59D162730}"
AVSTREAM_ANLG_VIDEO_CAP_PIN = "{16FFBD0A-F770-4692-A2FF-DD394DFE9564}"
AVSTREAM_ANLG_VIDEO_PRE_PIN = "{A19F6121-9CF7-4081-8053-256668FCBE1F}"
AVSTREAM_ANLG_AUDIO_CAP_PIN = "{BA9E27B1-CF44-490e-8EAB-5F662E5FFE74}"
AVSTREAM_MPEG_AES_PIN = "{9DEC84B9-BCEF-4aac-997E-43EDD0A2D6C7}"
AVSTREAM_MPEG_VES_PIN = "{181CF87E-7741-47ba-8629-22347E03C64C}"
AVSTREAM_MPEG_PS_PIN = "{DDA87B83-65DB-4aec-82D0-79FBE67D2BB6}"
;--------------------
; System Defines
;--------------------
SERVICE_BOOT_START = 0x0
SERVICE_SYSTEM_START = 0x1
SERVICE_AUTO_START = 0x2
SERVICE_DEMAND_START = 0x3
SERVICE_DISABLED = 0x4
SERVICE_KERNEL_DRIVER = 0x1
SERVICE_ERROR_IGNORE = 0x0
SERVICE_ERROR_NORMAL = 0x1
SERVICE_ERROR_SEVERE = 0x2
SERVICE_ERROR_CRITICAL = 0x3
FLG_REGSVR_DLLREGISTER = 0x00000001
;------------------------------------------------------------
; Customer Strings
;
; !!! MUST be changed if the driver has been customized, !!!
; !!! to not interfere with the original one. !!!
;
;------------------------------------------------------------
;--- Driver names for 32 bit OS ---
DRIVER_NAME_X32 = "3xHybrid.sys"
;--- Catalog file (signature) names for 32 bit OS ---
SIGNATURE_NAME_X32 = "3xHybrid.cat"
;--- Coinstaller DLL name for 32 bit OS ---
COINSTALLER_NAME_X32 = "34CoInstaller.dll"
;--- Service names linked to the driver binary ---
SERVICE_NAME_X32 = "3xHybrid"
SERVICE_DESCRIPTION = "ASUSTek SAA713x BDA Capture Driver"
;--- Name displayed in the device manager ---
DISPLAY_NAME = "ASUSTek SAA713x PCI Card"
;--- General names ---
PROVIDER = "ASUSTek"
INSTALLATION_DISK = "ASUSTek SAA713x Driver Installation Disk"
;----------------------------------------------------------
; Board Description
;
; -> Displayed within e.g. Graphedit
;
;----------------------------------------------------------
;*** Specific Names ***
;-----------------
ASUSTek.AudioDeviceDesc = "ASUSTek SAA713x Audio Capture Device"
ASUSTek_CUSTOM_TUNERNAME = "713x"
ASUSTV7134.DeviceDesc = "ASUSTek TV7134 Capture Device"
ASUSTV7133.DeviceDesc = "ASUSTek TV7133 Capture Device"
ASUSTV7135.DeviceDesc = "ASUSTek TV7135/Mercur Capture Device"
ASUSTiger.DeviceDesc = "ASUSTek Tiger Hybrid Capture Device"
ASUSTigerS.DeviceDesc = "ASUSTek Tiger-S Hybrid Capture Device"
ASUSTigerS3in1.DeviceDesc = "ASUSTeK Tiger-S/DVBS Hybrid Capture Device"
NECCAPTiger.DeviceDesc = "ASUSTeK Tiger Capture Device"
--
video4linux-list mailing list
Unsubscribe mailto:video4linux-list-request (at) redhat.com?subject=unsubscribe
https://www.redhat.com/mailman/listinfo/video4linux-list