after gc_OpenEx success not receive GC events

From: gustavo suenaga

-Hello,

I run a DMV/1200A PCI E1 under a linux 2.4.9-31 RedHat 7.2,
SR51 SP1, GlobalCall 3.0 and LiS 2.13.16
I configured the board with DM3_cfg.sh, then generated pdk.cfg manually and performed dlstop/dlstart.
After pdk.log file is generated with the following message:
/usr/dialogic/demos/gc_demos
PDKManager v1.7 (c) Dialogic 2001
**** Debug output will be printed.
**** Found mlm file qs_pdk.mlm
**** {p qs_r2mf.pcd l 0 m qs_pdk.mlm f qs_r2mf.fcd v pdk_ar_r2_io.cdp b 1 c 0}
Autodownloading board 1 line 0 chan 0 variant pdk_ar_r2_io.cdp
**** Matched on ;; DefineBSet (10,1,1,30,0,0,0,0,20,1,1,1,3,15,16,17,3,15,0) for TSC
**** Found 1 with 30 channels
**** Matched on ;; DefineBSet (20,2,1,30,0,0,0,0,20,1,1,1,3,15,16,17,3,15,0) for TSC
**** Found 2 with 30 channels
**** Matched on ;; DefineBSet (30,3,1,30,0,0,0,0,20,1,1,1,3,15,16,17,3,15,0) for TSC
**** Found 3 with 30 channels
**** Matched on ;; DefineBSet (40,4,1,30,0,0,0,0,20,1,1,1,3,15,16,17,3,15,0) for TSC
**** Found 4 with 30 channels
**** No specific boards. Doing all
**** Entering setvariant board 1
**** Filename specified.
**** Found match ar_r2_io
**** Found match pdk_r2_io.hot

When I execute gc_basic_call_model demo, it perform the following:

[root@ivrVT gc_demos]# ./gc_basic_call_model
 [MISC]: SRL mode ID set to SR_POLLMODE
gc_basic_call_model_B1T1.log successfully opened
 [MISC]: ********** GC DEMO - BASIC CALL MODEL ***********

 [GC_APICALL]: gc_Start(startp = NULL) Success
 [MISC]: Call Control Library Status:
                  GC_ICAPI_LIB - available
                  GC_ISDN_LIB - available
                  GC_ANAPI_LIB - available
                  GC_PDKRT_LIB - available
                  GC_SS7_LIB - is not available for use
                  GC_DM3CC_LIB - available
                  GC_IPM_LIB - available
                  GC_CUSTOM1_LIB - configured
                  GC_CUSTOM2_LIB - configured

 [MISC]: E1 or T1 device being opened
 [GC_APICALL]: gc_OpenEx(devicename=:N_dtiB1T1:P_pdk_ar_r2_io:V_dxxxB1C1, mode=EV_SYNC) Success

and then nothing succeed...

Anybody can help me?

Thank you.

Gustavo Suenaga
Telinver S.A-

To reply: mailto:General.28623@pysdiscussext.py.intel.com
To start a new topic: mailto:General@pysdiscussext.py.intel.com
To login: http://members.support.dialogic.com/wbproxy/wbpx.dll/~general
Received on Thu Jun 24 15:08:23 2004